欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

The knowledge of carbide grade identification will be shared in this article.Carbide is renowned for its high hardness, strength, corrosion resistance, and wear resistance. With the continuous expansion of the carbide market demand, it is widely applied in various fields such as construction, military, electronics and communication, aerospace, mechanical processing, metallurgy, petroleum exploration, and mining.

The classification of carbide?grades is mainly divided into three categories: cutting tool carbide?grades, geological and ore tool carbide?grades, and wear-resistant parts carbide?grades.

carbide grade

Carbide?Grades for Cutting Tools

The carbide?grades for cutting tools are mainly classified into six categories based on their application areas: P, M, K, N, S, and H. The identification of carbide?grades for cutting tools involves testing various indicators such as element composition, Rockwell hardness, Vickers hardness, flexural strength, metallographic structure (porosity, non-combined carbon, macroscopic pores), etc. The alloy performance recommended for operating conditions is primarily assessed based on indicators like wear resistance, toughness, cutting speed, feed rate, etc. The representation rules for carbide?grades for cutting tools are mainly composed of category codes, group numbers, and sub-group numbers, as shown in the diagram below.

How to Identify Carbide?Grades? 2

concrete categories of carbide grade for cutting tools

1.Grade P carbides are mainly divided into sub-grades P01, P10, P20, P30, and P40. The primary components include TiC and WC as the base, utilizing Co (Ni+Mo, Ni+Co) as a binder for carbides or coated alloys. Grade P carbides are primarily used for machining long chip materials such as steel, cast steel, and long-chipping malleable cast iron.

2.Grade M carbides are mainly divided into sub-grades M01, M10, M20, M30, and M40. The main components are WC as the base, with Co as a binder and a small amount of TiC (TaC, NbC) added for carbides or coated alloys. Grade M carbides are mainly used for machining general alloy materials such as stainless steel, cast steel, manganese steel, malleable cast iron, alloy steel, and alloy cast iron.

3.Grade K carbides are mainly divided into sub-grades K01, K10, K20, K30, and K40. The primary components are WC as the base, using Co as a binder and adding a small amount of TaC and NbC for carbides or coated alloys. Grade K carbides are primarily used for machining short chip materials such as cast iron, chilled cast iron, short-chipping malleable cast iron, and gray iron.

4.Grade N carbides are mainly divided into sub-grades N01, N10, N20, and N30. The main components are WC as the base, using Co a binder and adding a small amount of TaC, NbC, or CrC for carbides or coated alloys. Grade N carbides are mainly used for machining non-ferrous metal materials such as aluminum, magnesium, plastics, and wood.

5.Grade S carbides are mainly divided into sub-grades S01, S10, S20, and S30. The primary components are WC as the base, using Co as a binder and adding a small amount of TaC, NbC, or TiC for carbides or coated alloys. Grade S carbides are mainly used for machining heat-resistant and high-quality alloy materials containing nickel, cobalt, and titanium.

6.Grade H carbides are mainly divided into sub-grades H01, H10, H20, and H30. The main components are WC as the base, using Co as a binder and adding a small amount of TaC, NbC, or TiC for carbides or coated alloys. Grade H carbides are mainly used for machining hard chip materials such as quenched and hardened steel and chilled cast iron.

Carbide?Grades for Geological and Ore Tools

The characteristic code for carbide?grades used in geological and ore tools is represented by the letter “G,” and the group codes include 05, 10, 20, 30, 40, 50, and 60. The classification codes are A, B, C, D, E, F, W, and Z. The corresponding classifications for the classification codes are as follows:

How to Identify Carbide?Grades? 3

The representation rules for carbide?grades used in geological and ore tools primarily consist of characteristic codes, classification codes, group codes, and sub-group codes. An example is shown in the diagram below:

How to Identify Carbide?Grades? 4

The main components of carbides used in geological and ore tools are based on WC, with Co as a binder, and the addition of trace elements for carbides or coated alloys. The identification of carbide?grades for geological and ore tools primarily involves testing various indicators such as element composition, Rockwell hardness, Vickers hardness, flexural strength, and metallographic structure (porosity, non-combined carbon, macroscopic pores). For these carbides, the recommended alloy performance under operating conditions is primarily assessed based on indicators such as wear resistance and toughness.

Cabide Grades for Wear-Resistant Parts

The characteristic code for carbide?grades used in wear-resistant parts is represented by the letter “L,” and the classification codes include S, T, Q, and V. The carbide?types represented by the classification codes are as follows:

How to Identify Carbide?Grades? 5

The group codes for carbide?grades used in wear-resistant parts are respectively S: 10, 20, 30, 40; T: 10, 20, 30; Q: 10, 20, 30; V: 10, 20, 30, 40. The representation rules include characteristic codes, classification codes, group codes, and sub-group codes.

The main components of carbides used in wear-resistant parts are based on WC, with Co (or Co+Ni) as a binder, and the addition of trace elements for carbides or coated alloys. The identification of carbide?grades for wear-resistant parts primarily involves testing various indicators such as element composition, Rockwell hardness, Vickers hardness, flexural strength, and metallographic structure (porosity, non-combined carbon, macroscopic pores).

Tr? l?i

Email c?a b?n s? kh?ng ???c hi?n th? c?ng khai. Các tr??ng b?t bu?c ???c ?ánh d?u *

色橹橹欧美在线观看视频高清免费| 小美女淫荡的视频| 无码av一区二区大桥久未| 欧美日韩综合在线一区| 大黑屌日本另类肛交| 午夜色大片在线免费观看| 中文字幕在线观一二三区| 五月天国产成人免费视频| 啊灬啊别停灬用力啊男男在线观看| 欧美大鸡巴操大骚逼| 亚洲精品成人无码app| 成人免费a级毛片天天看| 精品人妻少妇一区二区三区不卡| 欧美日本大白屁股大黑逼操逼视频| 美女逼男逼小穴小骚下载| 中国女人日逼免费片| 西西大尺度无码免费视频| 欧美丰满大屁股女人的逼被操视频| 一区二区三区中文欧美| 啦啦啦视频在线手机播放| 大黑屌爆操日本女人| 久久综合色鬼综合色| 99草草视频在线精品| 欧美真人性爱视频| 国产乱精品一区二区三区视频了| 24日本精品视频免费| 伊人久久亚洲婷婷综合久久| 可以免费看污污片的软件| 欧美一区二区三区男人的天堂| 美女被插b在线观看| 婷婷激情五月天四房| 最新AV中文字幕在线看| 影音先锋亚洲中文综合网| 人妻熟女av一区二区三区| 日韩av一区二区三区激情在线| 中文字幕av一区二区三区哈| 欧美丰满大屁股女人的逼被操视频| 一区二区三区中文欧美| 久操视频中文字幕在线观看| 日韩伦理视频一区二区三区| 亚洲一区二区三区四区国产|