欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Machine tool compensation, a critical technology, is needed to correct machining errors and ensure machining accuracy. Below are the main types of machine tool compensation.

Because machine tools have systematic mechanical-related deviations that can be recorded by the system. However, due to environmental factors such as temperature or mechanical load, these deviations may still occur or increase during subsequent use.

What is Machine Tool Compensation? 2

Backlash Compensation

When transmitting force between the moving components of a machine tool and its driving components—such as ball screws—interruptions or delays can occur. This is because a completely gap-free mechanical structure would significantly increase machine tool wear and is also difficult to achieve from a technical standpoint. Mechanical gaps cause deviations between the motion path of the axis/spindle and the measurements from the indirect measurement system. This means that once the direction changes, the axis will move either too far or not far enough, depending on the size of the gap. The worktable and its associated encoder are also affected: if the encoder position leads the worktable, it reaches the commanded position prematurely, meaning the actual distance moved by the machine tool is shortened. During machine operation, by using the backlash tool compensation function on the corresponding axis, the previously recorded deviation is automatically activated when the direction changes, and this deviation is added to the actual position value.

 

Screw Pitch Error Compensation

The measurement principle of indirect measurement in CNC control systems is based on the assumption that the pitch of the ball screw remains constant over its effective travel range. Therefore, in theory, the actual position of the linear axis can be derived from the motion information of the drive motor.。

What is Machine Tool Compensation? 3

However, manufacturing errors in the ball screw can lead to deviations in the measurement system (also known as screw pitch errors). Measurement deviations (depending on the measurement system used) and installation errors of the measurement system on the machine tool (also referred to as measurement system errors) may further exacerbate this issue. To compensate for these two types of errors, an independent measurement system (such as laser measurement) can be used to measure the natural error curve of the CNC machine tool. The required tool compensation values are then saved in the CNC system for tool compensation.

What is Machine Tool Compensation? 4

Friction Compensation (Quadrant Error Compensation) and Dynamic Friction Compensation

Quadrant error compensation (also known as friction compensation) is suitable for all the aforementioned scenarios to significantly improve contour accuracy when machining circular profiles. The reason is as follows: During quadrant transitions, one axis moves at the maximum feed rate while the other axis remains stationary. As a result, the different friction behaviors of the two axes can lead to contour errors. Quadrant error tool compensation effectively reduces this error and ensures excellent machining results. The density of tool compensation pulses can be set based on an acceleration-related characteristic curve, which can be determined and parameterized through roundness testing. During roundness testing, deviations between the actual position of the circular contour and the programmed radius (especially during direction changes) are quantified and graphically displayed on the human-machine interface.

In newer versions of the system software, the integrated dynamic friction tool compensation function dynamically compensates for friction behavior at different machine speeds, reducing actual machining contour errors and achieving higher control accuracy.

 

Sag and Angular Error Compensation

What is Machine Tool Compensation? 5

If the weight of individual components of the machine tool causes displacement or tilting of moving parts, sag tool compensation is required because it can lead to sagging of relevant machine tool parts, including the guiding system. Angular error tool compensation is used when moving axes are not correctly aligned with each other (e.g., not perpendicular). As the offset from the zero position increases, the positional error also increases. Both types of errors are caused by the machine tool’s own weight or the weight of the tool and workpiece. During commissioning, the measured tool compensation values are quantified and stored in the SINUMERIK system in a form such as a compensation table, corresponding to specific positions. During machine operation, the positions of the relevant axes are interpolated based on the stored tool compensation values. For each continuous path movement, there is a base axis and a compensation axis.

 

Temperature Compensation

Heat can cause expansion in various parts of the machine tool. The extent of expansion depends on factors such as the temperature and thermal conductivity of each part. Different temperatures may cause changes in the actual positions of the axes, which can negatively impact the accuracy of the workpiece being machined. These changes in actual values can be offset through temperature tool compensation. Error curves for each axis at different temperatures can be defined. To ensure accurate compensation for thermal expansion, temperature compensation values, reference positions, and linear gradient parameters must be continuously transferred from the PLC to the CNC control system via functional blocks. Unexpected parameter changes are automatically corrected by the control system to prevent machine overload and activate monitoring functions.

 

Volumetric Compensation System (VCS)

tool compensation

The positions of rotary axes, their mutual tool compensation, and tool orientation errors can lead to systematic geometric errors in components such as turrets and rotary heads. Additionally, small errors may occur in the guiding systems of feed axes in every machine tool. For linear axes, these errors include linear position errors, horizontal and vertical straightness errors; for rotary axes, pitch, yaw, and roll errors may arise. Other errors, such as perpendicularity errors, can occur when aligning machine components. For example, in a three-axis machine tool, this can result in up to 21 geometric errors at the tool center point (TCP): six error types per linear axis multiplied by three axes, plus three angular errors. These deviations collectively form the total error, also known as the volumetric error.

 

The volumetric error describes the deviation between the actual TCP position of the machine tool and the TCP position of an ideal, error-free machine tool. SINUMERIK solution partners can determine volumetric errors using laser measurement equipment. Measuring errors at a single position is insufficient; errors across the entire machining volume must be measured. Typically, measurement values for all positions are recorded and plotted as curves, as the magnitude of errors depends on the position of the relevant feed axis and the measurement location. For example, deviations in the x-axis may vary when the y-axis and z-axis are in different positions—even at nearly the same x-axis position. With “CYCLE996 – Motion Measurement,” rotary axis errors can be determined in just a few minutes. This allows for continuous monitoring of machine tool accuracy and, if necessary, corrections can be made even during production.

 

Deviation Compensation (Dynamic Feedforward Control)

Deviation refers to the discrepancy between the position controller and the standard during the movement of a machine tool axis. Axis deviation is the difference between the target position and the actual position of the axis. Deviation causes speed-related unnecessary contour errors, especially when the contour curvature changes, such as in circles, squares, or other shapes. Using the NC advanced language command FFWON in the part program, speed-related deviations can be reduced to zero during path movement. Feedforward control improves path accuracy, resulting in better machining outcomes.

What is Machine Tool Compensation? 6

FFWON: Command to activate feedforward control

FFWOFF: Command to deactivate feedforward control

 

Electronic Counterbalance Compensation

In extreme cases, to prevent damage to the machine tool, tool, or workpiece caused by axis sagging, the electronic counterbalance function can be activated. In load axes without mechanical or hydraulic counterbalances, a vertical axis may unexpectedly sag once the brake is released. After activating the electronic counterbalance, unintended axis sagging can be compensated. Upon releasing the brake, a constant balancing torque maintains the position of the sagging axis.

發(fā)表評論

電子郵件地址不會(huì)被公開。 必填項(xiàng)已用*標(biāo)注

久久精品国产96精品-日韩人成理论午夜福利| 色综合色综合久久综合频道-埃及艳后黄版在线观看| 国产在线一区二区三区欧美-久久偷拍精品视频久久| 婷婷综合在线视频观看-亚洲一区二区三区香蕉| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 青青草原免费国产在线视频-精品人妻乱码一区二区三区四区| av噜噜国产在线观看-欧美视频亚洲视频一区二区三区| 欧美字幕一区二区三区-好吊妞欧美一区二区在线观看| 欧美一区二区三区调教视频-三上悠亚国产精品一区二区三区| 亚洲欧洲成视频免费观看-国产福利一区二区在线观看| 精品国产综合一区二区三区-蜜臀一区二区三区刺激视频| 性都花花世界亚洲综合-日韩av一区二区三区| 熟女熟妇伦51788-国产av在线播放一区二区三区| 亚洲欧美日韩国产一区二区三区-国产欧美日韩一区二区免费| 黄色91av免费在线观看-欧美黄片一级在线观看| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 三级a级一级大片在线观看-日韩av有码免费观看| 亚洲国产精品日韩欧美-国产又粗又硬又大爽黄| 国产精品一区二区欧美视频-国产一区二区三区天码| 日韩精品一区二区三区粉嫩av-欧美亚洲国产中文字幕| 中文字幕日韩精品不卡一区二区-成人av在线观看一区二区| 极品人妻av在线播放-久久精品视频一区二区三区| 在线观看中午中文乱码-2021国产一级在线观看| 午夜精品午夜福利在线-内射无套内射国产精品视频| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 青青草原免费国产在线视频-精品人妻乱码一区二区三区四区| 蜜臀一区二区三区精品在线-99久久久精品免费看国产| 亚洲欧美精品在线一区-99热国产在线手机精品99| 亚洲欧美激情自拍色图-国产亚洲精品sese在线播放| 激情字幕久久久字幕中文-一区二区三区免费黄片| 99精品只有久久精品免费-蜜臀一区二区三区精品久久久| 国产一区二区三区噜噜-精品久久亚洲一区二区欧美| 欧美精品一区二区三区爽爽爽-日韩国产精品亚洲经典| 国产欧美日韩中文字幕在线-国产伊人一区二区三区四区| 亚洲永久免费在线观看-亚洲欧美导航一区二区导航| 青木玲高清中文字幕在线看-视频在线免费观看你懂的| 欧美精品一区二区三区爽爽爽-日韩国产精品亚洲经典| 欧洲精品一区二区三区中文字幕-91久久国产综合久久蜜月精品| 国产一区二区三区噜噜-精品久久亚洲一区二区欧美| 亚洲福利视频免费观看-中文字幕日本不卡一区二区|