欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Machine tool compensation, a critical technology, is needed to correct machining errors and ensure machining accuracy. Below are the main types of machine tool compensation.

Because machine tools have systematic mechanical-related deviations that can be recorded by the system. However, due to environmental factors such as temperature or mechanical load, these deviations may still occur or increase during subsequent use.

What is Machine Tool Compensation? 2

Backlash Compensation

When transmitting force between the moving components of a machine tool and its driving components—such as ball screws—interruptions or delays can occur. This is because a completely gap-free mechanical structure would significantly increase machine tool wear and is also difficult to achieve from a technical standpoint. Mechanical gaps cause deviations between the motion path of the axis/spindle and the measurements from the indirect measurement system. This means that once the direction changes, the axis will move either too far or not far enough, depending on the size of the gap. The worktable and its associated encoder are also affected: if the encoder position leads the worktable, it reaches the commanded position prematurely, meaning the actual distance moved by the machine tool is shortened. During machine operation, by using the backlash tool compensation function on the corresponding axis, the previously recorded deviation is automatically activated when the direction changes, and this deviation is added to the actual position value.

 

Screw Pitch Error Compensation

The measurement principle of indirect measurement in CNC control systems is based on the assumption that the pitch of the ball screw remains constant over its effective travel range. Therefore, in theory, the actual position of the linear axis can be derived from the motion information of the drive motor.。

What is Machine Tool Compensation? 3

However, manufacturing errors in the ball screw can lead to deviations in the measurement system (also known as screw pitch errors). Measurement deviations (depending on the measurement system used) and installation errors of the measurement system on the machine tool (also referred to as measurement system errors) may further exacerbate this issue. To compensate for these two types of errors, an independent measurement system (such as laser measurement) can be used to measure the natural error curve of the CNC machine tool. The required tool compensation values are then saved in the CNC system for tool compensation.

What is Machine Tool Compensation? 4

Friction Compensation (Quadrant Error Compensation) and Dynamic Friction Compensation

Quadrant error compensation (also known as friction compensation) is suitable for all the aforementioned scenarios to significantly improve contour accuracy when machining circular profiles. The reason is as follows: During quadrant transitions, one axis moves at the maximum feed rate while the other axis remains stationary. As a result, the different friction behaviors of the two axes can lead to contour errors. Quadrant error tool compensation effectively reduces this error and ensures excellent machining results. The density of tool compensation pulses can be set based on an acceleration-related characteristic curve, which can be determined and parameterized through roundness testing. During roundness testing, deviations between the actual position of the circular contour and the programmed radius (especially during direction changes) are quantified and graphically displayed on the human-machine interface.

In newer versions of the system software, the integrated dynamic friction tool compensation function dynamically compensates for friction behavior at different machine speeds, reducing actual machining contour errors and achieving higher control accuracy.

 

Sag and Angular Error Compensation

What is Machine Tool Compensation? 5

If the weight of individual components of the machine tool causes displacement or tilting of moving parts, sag tool compensation is required because it can lead to sagging of relevant machine tool parts, including the guiding system. Angular error tool compensation is used when moving axes are not correctly aligned with each other (e.g., not perpendicular). As the offset from the zero position increases, the positional error also increases. Both types of errors are caused by the machine tool’s own weight or the weight of the tool and workpiece. During commissioning, the measured tool compensation values are quantified and stored in the SINUMERIK system in a form such as a compensation table, corresponding to specific positions. During machine operation, the positions of the relevant axes are interpolated based on the stored tool compensation values. For each continuous path movement, there is a base axis and a compensation axis.

 

Temperature Compensation

Heat can cause expansion in various parts of the machine tool. The extent of expansion depends on factors such as the temperature and thermal conductivity of each part. Different temperatures may cause changes in the actual positions of the axes, which can negatively impact the accuracy of the workpiece being machined. These changes in actual values can be offset through temperature tool compensation. Error curves for each axis at different temperatures can be defined. To ensure accurate compensation for thermal expansion, temperature compensation values, reference positions, and linear gradient parameters must be continuously transferred from the PLC to the CNC control system via functional blocks. Unexpected parameter changes are automatically corrected by the control system to prevent machine overload and activate monitoring functions.

 

Volumetric Compensation System (VCS)

tool compensation

The positions of rotary axes, their mutual tool compensation, and tool orientation errors can lead to systematic geometric errors in components such as turrets and rotary heads. Additionally, small errors may occur in the guiding systems of feed axes in every machine tool. For linear axes, these errors include linear position errors, horizontal and vertical straightness errors; for rotary axes, pitch, yaw, and roll errors may arise. Other errors, such as perpendicularity errors, can occur when aligning machine components. For example, in a three-axis machine tool, this can result in up to 21 geometric errors at the tool center point (TCP): six error types per linear axis multiplied by three axes, plus three angular errors. These deviations collectively form the total error, also known as the volumetric error.

 

The volumetric error describes the deviation between the actual TCP position of the machine tool and the TCP position of an ideal, error-free machine tool. SINUMERIK solution partners can determine volumetric errors using laser measurement equipment. Measuring errors at a single position is insufficient; errors across the entire machining volume must be measured. Typically, measurement values for all positions are recorded and plotted as curves, as the magnitude of errors depends on the position of the relevant feed axis and the measurement location. For example, deviations in the x-axis may vary when the y-axis and z-axis are in different positions—even at nearly the same x-axis position. With “CYCLE996 – Motion Measurement,” rotary axis errors can be determined in just a few minutes. This allows for continuous monitoring of machine tool accuracy and, if necessary, corrections can be made even during production.

 

Deviation Compensation (Dynamic Feedforward Control)

Deviation refers to the discrepancy between the position controller and the standard during the movement of a machine tool axis. Axis deviation is the difference between the target position and the actual position of the axis. Deviation causes speed-related unnecessary contour errors, especially when the contour curvature changes, such as in circles, squares, or other shapes. Using the NC advanced language command FFWON in the part program, speed-related deviations can be reduced to zero during path movement. Feedforward control improves path accuracy, resulting in better machining outcomes.

What is Machine Tool Compensation? 6

FFWON: Command to activate feedforward control

FFWOFF: Command to deactivate feedforward control

 

Electronic Counterbalance Compensation

In extreme cases, to prevent damage to the machine tool, tool, or workpiece caused by axis sagging, the electronic counterbalance function can be activated. In load axes without mechanical or hydraulic counterbalances, a vertical axis may unexpectedly sag once the brake is released. After activating the electronic counterbalance, unintended axis sagging can be compensated. Upon releasing the brake, a constant balancing torque maintains the position of the sagging axis.

Leave a Reply

Your email address will not be published. Required fields are marked *

欧美精品国产系列一二三国产真人-在线观看国产午夜视频| 国产成人精品免费视频大全办公室-亚洲欧美日本综合在线| 国产免费高清av在线播放-成年人在线播放中文字幕| 91大神国内精品免费网站-亚洲免费电影一区二区| 熟妇勾子乱一区二区三区-欧美爱爱视频一区二区| 三上悠亚免费观看在线-青青草原在线视频观看精品| 日韩毛片在线免费人视频-超碰中文字幕av在线| 日韩高清在线观看一区二区-美产av在线免费观看| 日韩毛片在线免费人视频-超碰中文字幕av在线| 欧美日韩精品人妻在线-在线播放中文字幕一区| 99久久精品一区二区成人-麻豆国产av玩弄放荡人妇系列| 国产欧美成人精品第一区-日本黄色精品一区二区| 97一区二区三区在线-欧美护士性极品hd4k| 亚洲午夜久久久精品影院-性感美女在线观看网站国产| 少妇一区二区三区粉嫩av-国产精品区久久久久久久| 91蜜桃传媒一二三区-日韩欧美国产一区呦呦| 激情字幕久久久字幕中文-一区二区三区免费黄片| 免费午夜福利在线观看-黄色日本黄色日本韩国黄色| 两性污污视频网站在线观看-亚洲欧美日韩激情一区| 色综合色综合久久综合频道-埃及艳后黄版在线观看| 97香蕉久久国产在线观看-麻豆黄色广告免费看片| 日韩高清在线观看一区二区-美产av在线免费观看| 欧美日韩国产亚洲免费-肉体粗喘娇吟国产91| 国产在线观看高清精品-四季av一区二区三区中文字幕| 亚洲欧美日韩二区三区-国产在线欧美一区日韩二区| 亚洲福利视频免费观看-中文字幕日本不卡一区二区| 在线国产自偷自拍视频-蜜桃a∨噜噜一区二区三区| 天天干天天日天天射天天舔-精品香蕉视频官网在线观看| 国产黄污网站在线观看-成人av电影中文字幕| 国产在线观看高清精品-四季av一区二区三区中文字幕| 蜜臀一区二区三区精品在线-99久久久精品免费看国产| 欧美精品一区二区不卡-精品国产一区二区三区香蕉网址| 日本女优一卡二卡在线观看-欧美大胆a级视频秒播| 亚洲国产精品一区二区av-日本一级黄色一区二区| 日本中文字幕永久在线人妻蜜臀-欧美一区二区的网站在线观看| 亚洲欧美精品在线一区-99热国产在线手机精品99| 俄罗斯胖老太太黄色特级片-国产精品黑丝美腿美臀| 国产欧美日本一区二区-一区二区三区亚洲在线播放| 7m视频7m精品视频网站-亚洲综合香蕉视频在线| 91蜜桃传媒一二三区-日韩欧美国产一区呦呦| 国产免费高清av在线播放-成年人在线播放中文字幕|