欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

  1. What is heat treatment and heat treatment oil?

A: the heat treatment of steel is to heat the steel to a certain temperature, keep it for a period of time, and cool it under the selected process conditions, so as to change the metallographic structure of the steel, so as to obtain the required process properties and mechanical properties.

The medium used to cool steel in heat treatment process is called heat treatment oil.

What is Heat Treatment Oil? 2
  1. What is the cooling principle of quenching oil?  

A: the cooling process of steel in quenching oil transfers heat in three different ways. The first stage is the steam film stage, with low cooling speed; the second stage is the boiling stage, with the fastest cooling speed; the third stage is the convective heat transfer stage, with slow cooling speed.  

  1. How to determine the characteristic temperature and time of quenching oil?

A: the characteristic temperature of quenching oil refers to the temperature at which the steam film breaks, that is, the boiling stage begins, and the corresponding time is the characteristic time. Characteristic temperature and characteristic time are important indexes to evaluate the quality and performance of quenching oil.

  1. What is the meaning of the cooling time of quenching oil from 800 ℃ to 400 ℃?

A: the cooling time of quenching oil from 800 ℃ to 400 ℃ directly reflects the cooling ability of quenching oil in austenite unstable zone. The characteristic temperature of quenching oil is high, and the cooling time from 800 ℃ to 400 ℃ is short, which can avoid the transformation of parts to pearlite structure, so as to obtain the required martensite structure and lower bainite structure. Make the parts have high hardness, high fatigue strength and high wear resistance.

  1. What are the characteristics of heat treatment oil?

A: as the heat treatment oil works under high temperature for a long time, it should have the following main properties: good cooling property, high flash point and ignition point, good thermal oxidation stability, as low as possible viscosity and moisture content, and certain brightness.

  1. What is the specification of heat treatment oil in China? How is it classified?

A: the specification of heat treatment oil in China is sh0546-92. Quenching oil is divided into three categories: cold bath quenching, hot bath quenching and tempering oil. The service temperature of cold bath quenching oil is 20-80 ℃, and the maximum temperature is not more than 100 ℃, such as ordinary quenching oil, rapid quenching oil, bright quenching oil and vacuum quenching oil; the service temperature of hot bath quenching oil is 120-200 ℃, such as isothermal grading quenching oil, which is divided into No. 1 and No. 2; tempering oil is also divided into No. 1 (used for 100-180 ℃) and No. 2 (used for 180-270 ℃).

  1. What is quenching oil and tempering oil?

A: the cooling medium used in the quenching process is called quenching oil, which is the main representative of the heat treatment process, and the heat treatment oil used in the tempering process is called tempering oil.

What is Heat Treatment Oil? 3
  1. What is bright quenching oil?

A: the metal parts heated to a certain temperature can still keep bright surface after cooling by quenching oil, which is called bright quenching oil. Usually bright quenching oil is added with bright additive and quenched in protective atmosphere.

  1. What is rapid quenching oil?

A: rapid quenching oil refers to the quenching oil with relatively fast cooling speed. The characteristic temperature of quenching oil is 580-640 ℃, and the characteristic time is less than 4 seconds. The cooling time from 800 ℃ to 400 ℃ is 4-5 seconds, which is collectively referred to as rapid quenching oil. Rapid quenching oil is suitable for quenching and tempering, carburizing and other parts requiring high cooling rate, large forging parts, large gear and quenching press in salt bath furnace, box furnace, Chinese furnace and continuous quenching furnace.

  1. What is vacuum quenching oil?

A: the quenching oil used as cooling medium in vacuum quenching process is called vacuum quenching oil. The vacuum quenching oil must have low saturated vapor pressure, small evaporation loss, good thermal stability and cooling capacity. It is suitable for vacuum quenching of bearing steel, die steel, large and medium aviation structural steel, etc.

  1. What is austempering oil? How many?

A: isothermal quenching is to first heat the quenching medium to the required isothermal temperature, and then put the heated parts in the quenching medium, so that the transformation of lower bainite structure is completed in the isothermal process. The cooling medium used in this process is called isothermal quenching oil; graded quenching is to put the heated workpiece in the medium slightly higher than the martensite transformation temperature for cooling, and wait for the inside and outside of the workpiece After the temperature is the same, and before the austenite begins to decompose, it is quickly transferred to the oil and cooled to room temperature, so that austenite transforms into martensite. The cooling medium used in this process is called step quenching oil. Austempering is applicable to the quenching of bearing steel, carburized steel bearing inner and outer rings, automobile gears, precision parts, half shafts and other workpieces and easily deformed parts. There are two kinds of Austempering oil No.1 and No.2, of which the service temperature of No.1 austempering oil is about 120 ℃ and that of No.2 austempering oil is about 160 ℃.

What is Heat Treatment Oil? 4
  1. What are the functions and characteristics of tempering oil?

A: tempering is a process that must be carried out after steel quenching. Its purpose and function is to reduce and eliminate the internal stress caused by steel quenching and reduce brittleness. Tempering oil has good thermal oxidation stability, high flash point and good heat transfer performance. It can be divided into No. 1 and No. 2 grades. The service temperature of No. 1 is about 150 ℃ and that of No. 2 is about 200 ℃.

  1. What is multistage (general) quenching oil? What are the characteristics?

Answer: multistage (general) quenching oil refers to the cooling medium used in the universal (multi-purpose) quenching furnace, which can be used to quench a variety of steels, that is, it is suitable for materials with poor hardenability, as well as for materials with good hardenability and easy deformation. The multistage (general) quenching oil has fast cooling speed at low temperature (40-80 ℃), which is equivalent to fast quenching oil. It has good thermal oxidation stability and certain cooling capacity at high temperature (120-200 ℃), and has the characteristics of small deformation after quenching.

Leave a Reply

Your email address will not be published. Required fields are marked *

激情综合五月开心久久| 九九热精品视频免费观看| 欧美成人黄色一级视频| 在线中文字幕亚洲欧美一区| 我想看亚洲一级黄色录像| 这里只有九九热精品视频| 国产一区二区三区四区中文| 91精品国产品国语在线不卡| 精品一区二区三区乱码中文| 国产av一区二区三区四区五区| 国产老熟女乱子人伦视频| 好吊视频有精品永久免费| 亚洲综合天堂一二三区| 很黄很污在线免费观看| 国产成人精品一区二区在线看| 福利专区 久久精品午夜| 国产精品一区二区传媒蜜臀| 丁香六月婷婷基地伊人| 日本黄色美女日本黄色| 男人把女人操得嗷嗷叫| 国产精品国三级国产专不卡| 美女黄片大全在线观看| 日本特黄特色大片免费观看| 黑人巨大精品欧美一区二区区| 亚洲精品一区二区三区日韩| 女人高潮被爽到呻吟在线观看| 日韩1区二区三区麻豆| 自拍偷拍一区二区三区| 日本高清一区免费不卡| 91精品国产av一区二区| 成人精品网一区二区三区| 日本中文字幕在线精品| 免费午夜福利不卡片在线 视频| 精品香蕉一区二区在线| 久久国产亚洲精品赲碰热| 亚洲av熟女一区二区三区蜜桃| 国产香蕉国产精品偷在线观看| 中文字幕久久精品亚洲乱码| 亚洲黑人精品一区二区欧美| 国产又爽又猛又粗又色对黄| 在线日本不卡一区二区|