欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Machine tool compensation, a critical technology, is needed to correct machining errors and ensure machining accuracy. Below are the main types of machine tool compensation.

Because machine tools have systematic mechanical-related deviations that can be recorded by the system. However, due to environmental factors such as temperature or mechanical load, these deviations may still occur or increase during subsequent use.

What is Machine Tool Compensation? 2

Backlash Compensation

When transmitting force between the moving components of a machine tool and its driving components—such as ball screws—interruptions or delays can occur. This is because a completely gap-free mechanical structure would significantly increase machine tool wear and is also difficult to achieve from a technical standpoint. Mechanical gaps cause deviations between the motion path of the axis/spindle and the measurements from the indirect measurement system. This means that once the direction changes, the axis will move either too far or not far enough, depending on the size of the gap. The worktable and its associated encoder are also affected: if the encoder position leads the worktable, it reaches the commanded position prematurely, meaning the actual distance moved by the machine tool is shortened. During machine operation, by using the backlash tool compensation function on the corresponding axis, the previously recorded deviation is automatically activated when the direction changes, and this deviation is added to the actual position value.

 

Screw Pitch Error Compensation

The measurement principle of indirect measurement in CNC control systems is based on the assumption that the pitch of the ball screw remains constant over its effective travel range. Therefore, in theory, the actual position of the linear axis can be derived from the motion information of the drive motor.。

What is Machine Tool Compensation? 3

However, manufacturing errors in the ball screw can lead to deviations in the measurement system (also known as screw pitch errors). Measurement deviations (depending on the measurement system used) and installation errors of the measurement system on the machine tool (also referred to as measurement system errors) may further exacerbate this issue. To compensate for these two types of errors, an independent measurement system (such as laser measurement) can be used to measure the natural error curve of the CNC machine tool. The required tool compensation values are then saved in the CNC system for tool compensation.

What is Machine Tool Compensation? 4

Friction Compensation (Quadrant Error Compensation) and Dynamic Friction Compensation

Quadrant error compensation (also known as friction compensation) is suitable for all the aforementioned scenarios to significantly improve contour accuracy when machining circular profiles. The reason is as follows: During quadrant transitions, one axis moves at the maximum feed rate while the other axis remains stationary. As a result, the different friction behaviors of the two axes can lead to contour errors. Quadrant error tool compensation effectively reduces this error and ensures excellent machining results. The density of tool compensation pulses can be set based on an acceleration-related characteristic curve, which can be determined and parameterized through roundness testing. During roundness testing, deviations between the actual position of the circular contour and the programmed radius (especially during direction changes) are quantified and graphically displayed on the human-machine interface.

In newer versions of the system software, the integrated dynamic friction tool compensation function dynamically compensates for friction behavior at different machine speeds, reducing actual machining contour errors and achieving higher control accuracy.

 

Sag and Angular Error Compensation

What is Machine Tool Compensation? 5

If the weight of individual components of the machine tool causes displacement or tilting of moving parts, sag tool compensation is required because it can lead to sagging of relevant machine tool parts, including the guiding system. Angular error tool compensation is used when moving axes are not correctly aligned with each other (e.g., not perpendicular). As the offset from the zero position increases, the positional error also increases. Both types of errors are caused by the machine tool’s own weight or the weight of the tool and workpiece. During commissioning, the measured tool compensation values are quantified and stored in the SINUMERIK system in a form such as a compensation table, corresponding to specific positions. During machine operation, the positions of the relevant axes are interpolated based on the stored tool compensation values. For each continuous path movement, there is a base axis and a compensation axis.

 

Temperature Compensation

Heat can cause expansion in various parts of the machine tool. The extent of expansion depends on factors such as the temperature and thermal conductivity of each part. Different temperatures may cause changes in the actual positions of the axes, which can negatively impact the accuracy of the workpiece being machined. These changes in actual values can be offset through temperature tool compensation. Error curves for each axis at different temperatures can be defined. To ensure accurate compensation for thermal expansion, temperature compensation values, reference positions, and linear gradient parameters must be continuously transferred from the PLC to the CNC control system via functional blocks. Unexpected parameter changes are automatically corrected by the control system to prevent machine overload and activate monitoring functions.

 

Volumetric Compensation System (VCS)

tool compensation

The positions of rotary axes, their mutual tool compensation, and tool orientation errors can lead to systematic geometric errors in components such as turrets and rotary heads. Additionally, small errors may occur in the guiding systems of feed axes in every machine tool. For linear axes, these errors include linear position errors, horizontal and vertical straightness errors; for rotary axes, pitch, yaw, and roll errors may arise. Other errors, such as perpendicularity errors, can occur when aligning machine components. For example, in a three-axis machine tool, this can result in up to 21 geometric errors at the tool center point (TCP): six error types per linear axis multiplied by three axes, plus three angular errors. These deviations collectively form the total error, also known as the volumetric error.

 

The volumetric error describes the deviation between the actual TCP position of the machine tool and the TCP position of an ideal, error-free machine tool. SINUMERIK solution partners can determine volumetric errors using laser measurement equipment. Measuring errors at a single position is insufficient; errors across the entire machining volume must be measured. Typically, measurement values for all positions are recorded and plotted as curves, as the magnitude of errors depends on the position of the relevant feed axis and the measurement location. For example, deviations in the x-axis may vary when the y-axis and z-axis are in different positions—even at nearly the same x-axis position. With “CYCLE996 – Motion Measurement,” rotary axis errors can be determined in just a few minutes. This allows for continuous monitoring of machine tool accuracy and, if necessary, corrections can be made even during production.

 

Deviation Compensation (Dynamic Feedforward Control)

Deviation refers to the discrepancy between the position controller and the standard during the movement of a machine tool axis. Axis deviation is the difference between the target position and the actual position of the axis. Deviation causes speed-related unnecessary contour errors, especially when the contour curvature changes, such as in circles, squares, or other shapes. Using the NC advanced language command FFWON in the part program, speed-related deviations can be reduced to zero during path movement. Feedforward control improves path accuracy, resulting in better machining outcomes.

What is Machine Tool Compensation? 6

FFWON: Command to activate feedforward control

FFWOFF: Command to deactivate feedforward control

 

Electronic Counterbalance Compensation

In extreme cases, to prevent damage to the machine tool, tool, or workpiece caused by axis sagging, the electronic counterbalance function can be activated. In load axes without mechanical or hydraulic counterbalances, a vertical axis may unexpectedly sag once the brake is released. After activating the electronic counterbalance, unintended axis sagging can be compensated. Upon releasing the brake, a constant balancing torque maintains the position of the sagging axis.

Bir cevap yaz?n

E-posta hesab?n?z yay?mlanmayacak. Gerekli alanlar * ile i?aretlenmi?lerdir

国产在线一区二区三区欧美-久久偷拍精品视频久久| 午夜福利卫生纸福利院-一区二区三区久久亚洲| 性激烈欧美三级在线播放-久久中文字幕人妻少妇| 亚洲av高清一区三区三区-久久人妻夜夜做天天爽| 日韩精品一区二区三区粉嫩av-欧美亚洲国产中文字幕| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 国产av一区二区三区日韩接吻-av网址在线播放网站| 99久热精品免费观看四虎-亚洲天堂精品视频在线| 日本高清二区视频久二区-大香蕉在线视频大香蕉在线视频| 中文字幕日本在线资源-国产+成+人+亚洲欧洲自线| 欧美日本亚一级二级三区久久精品-日韩欧美一区二区久久婷婷| 97一区二区三区在线-欧美护士性极品hd4k| 欧美精品国产系列一二三国产真人-在线观看国产午夜视频| av网址在线直接观看-黄色av全部在线观看| 国产aa视频一区二区三区-国产精品久久久久久久毛片动漫| 久久精品国产亚洲av湖南-竹菊精品一区二区三区| 青青草原免费国产在线视频-精品人妻乱码一区二区三区四区| 欧美亚洲另类久久久精品-国产精品一区二区亚洲推荐| 一区二区三区日本韩国欧美-日本1区2区3区4区在线观看| 午夜日韩精品在线视频-亚洲网老鸭窝男人的天堂| 97香蕉久久国产在线观看-麻豆黄色广告免费看片| 国产精品久久99精品毛片-国产四季高清一区二区三区| 99精品只有久久精品免费-蜜臀一区二区三区精品久久久| 男人的天堂久久精品激情-最新亚洲精品a国产播放| 可以免费看污污视频的网站-日韩欧美不卡视频在线观看| 婷婷人妻少妇激情在线-欧美日韩人体艺术一区二区| 日本少妇激情一区二区-亚洲自偷自拍熟女另类蜜臀| 国产亚洲欧美一区91-亚洲欧美一区二区在线| 极品人妻av在线播放-久久精品视频一区二区三区| av噜噜国产在线观看-欧美视频亚洲视频一区二区三区| 国产在线一区二区三区欧美-久久偷拍精品视频久久| 国产老熟女激情小视频-成人一区二区人妻不卡视频| 日韩国产一区二区三区在线-精品日韩人妻少妇av| 欧美一区二区三区调教视频-三上悠亚国产精品一区二区三区| 天天干天天日天天射天天舔-精品香蕉视频官网在线观看| 黄片免费观看视频下载-国产丝袜诱惑在线视频| 五月婷婷六月在线观看视频-亚洲黑寡妇黄色一级片| 国产美女裸露无遮挡双奶网站-国产精品色午夜视频免费看| 人妻互换精品一区二区-夜夜爽一区二区三区视频| 亚洲欧洲成视频免费观看-国产福利一区二区在线观看| 亚洲美女喘息呻吟的网站-国产免费一区二区三区三洲|