欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Carbide?rods, due to their special properties of wear resistance, high hardness, excellent fracture toughness, and compressive strength, have been widely used in various fields such as metal processing, electronics industry, wood processing, aerospace industry, and medicine. They are ideal preliminary materials for manufacturing printed circuit board micro-drills, milling cutters, reamers, step tools, long rod tools, taps, and dot matrix printer needles. With the development of technology, the demand for carbide?rods is increasing, and forming techniques have evolved from traditional processes such as cold isostatic pressing and die pressing to more modern and economical extrusion molding processes, resulting in better quality and a wider variety of products.

карбидный стержень

Powder Extrusion Molding (PEM)

Powder extrusion molding (PEM) involves the extrusion of a mixture of powder, binders, plasticizers, etc., through a die nozzle to obtain the desired shape and size of the blank. The basic process of PEM includes powder mixing, granulation, extrusion molding, debinding, and sintering. PEM can be operated at low temperature and low pressure, with no limitation on the length of the product, uniform longitudinal density, and advantages such as strong forming continuity, low cost, and high efficiency, making it the main method of forming carbide?round bars today. Additionally, the use of hot extrusion molding has been adopted to prepare dispersion-strengthened materials and high-temperature alloys.

Powder Injection Molding (PIM)

Powder injection molding (PIM) combines traditional plastic molding processes with powder metallurgy technology. It involves mixing powder and molding agents, granulating, heating in an injection molding machine to form a flowable material, injecting into the mold cavity under pressure, and obtaining preformed blanks with uniform structure and complex geometry. Products produced by this method have good surface finish and shapes close to the final product. PIM improves the sintering performance by maintaining good flowability of the carbide rod powder during injection and enhancing the interaction between binders and alloy powders. Compared to traditional molding methods like die pressing, PIM offers advantages such as unrestricted product shapes, uniform product density, wide applicability, and consistent shrinkage of product parts, allowing better control of dimensional tolerances.

A Brief Introduction to 7 Forming Methods of Carbide?Rods 2

Cold Isostatic Pressing (CIP)

Cold isostatic pressing (CIP) involves placing carbide rod powder in a closed liquid environment at room temperature to form the powder under ultra-high pressure transmitted by the liquid. The pressure transmitted by the liquid medium during isostatic pressing is equal in all directions, resulting in uniform stress on the blank and significantly improved product performance. Typically, preforms are obtained through metal die pressing followed by cold isostatic pressing. After sintering, carbides produced by cold isostatic pressing exhibit low shrinkage, high density, and hardness.

Explosive Forming (EF)

Explosive forming is a special method of compacting blanks using intense explosive pressure. It involves placing explosive substances around a shell containing superhard powder. The enormous pressure generated during the explosion (up to 10 MPa) can rapidly compact blanks with very high relative density. Experiments have shown that the density of WC-8Co composite powder can reach 99.2% using explosive forming.

High Velocity Compaction (HVC)

High velocity compaction (HVC) involves compacting powder at pressures of 600 to 1000 MPa and velocities of 2 to 30 m/s using hydraulic-controlled heavy hammers. Compared to traditional die pressing, HVC achieves significantly faster compaction rates, up to 500 to 1000 times faster. This technology improves material properties, and the repeated compaction characteristic enables small to medium-sized equipment to produce large-sized components.

Краткое введение в 7 методов формовки твердосплавных стержней 3

Warm Compaction (PM)

Warm compaction involves pressing carbide rod powder at temperatures of 100 to 150°C in heated molds to obtain blanks. The process effectively increases the density and strength of the pressed blanks. Recently, flow-assisted warm compaction (WFC) has been developed based on warm compaction, which has the capability to manufacture high-density parts with complex geometries, offering broad prospects for the manufacturing of parts with complex shapes such as side cavities and threaded holes.

Extrusion molding of carbide double helix hole bars

The so-called inner helical hole bar refers to the part of the spiral cutting tool that forms spiral cooling holes. When the tool is in operation, the inner holes can pass coolant, reducing the processing temperature. The angles of the cooling holes and the cutting edge of the drill tool are synchronized, typically at 45°, 30°, and 15°; the most commonly used conventional tool spiral cooling hole angle is 30°.

External helix extrusion for helix hole carbide rod

External helix extrusion involves the use of grooves on the male mold to forcefully change the direction of the extruded fluid material, rotating it to extrude the billet. The manufacturing of the cooling hole core rod is synchronized with the rotation direction of the mold thread. The entire process requires complex mold design and is similar to ordinary extrusion methods, making it one of the most widely used extrusion techniques domestically and internationally.

Internal helix extrusion

Internal helix extrusion utilizes the special structure of a double helix extruder to extend the core rod to the extrusion screw, rotating the core rod by the screw to achieve the helical action. This process has simpler mold design but requires strict control over extrusion parameters: the extrusion speed of the fluid and the rotation speed of the core rod must maintain a fixed proportion; otherwise, the geometric parameters of the product may not meet requirements. The fluid motion during extrusion is similar to that of other rods.

Due to the difficulty of this technique,there are a handful of companies possessing the capability of production, among which Meetyou Carbide stands out. There is not much difference in the extrusion method between triple helix holes and double helix holes, only the design of the core rod in the mold differs.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

婷婷激情五月天四房| 免费看澡美女逼视频看看| 亚洲国际精品一区二区| 天天免费的无码AV| 啊啊啊男女激情插插视频| 在线精品亚洲观看不卡欧| 9国产亚洲精品国产| 国产成人无码AV一区二区三区| av在线国产哟哟| 俩男人插下面的视频| 黑人大鸡巴双插美女| 女人张开腿让男人捅个爽| 国产蜜月精品高清一区二区三区| 久久久国产精品亚洲无码| 国产高清第一区第二区第一页| 日本黑鸡吧黄色录像| 日本人妻与家公的伦理片| 黄色录像片操大逼的| 性爱大鸡吧喷水视频| 中文字幕乱码人妻一区二区三区| 潮中文字幕在线观看| 国产精品一区二区三区在线视| 九九视频免费在线观看| 欧美区 日韩区 亚洲区| 鸡巴和逼中国美女| 大鸡巴插入骚穴在线观看| 少妇勾搭外卖员在线观看| 下载风骚美女想吃大机吧| 日韩久久中文字幕| 午夜十八禁福利亚洲一区二区| 午夜国产精品午夜福利网| 看人妻仑乱A级毛片| 中文字幕在线精品的视频| 影音先锋亚洲中文综合网| 爆操大奶骚货视频| 久久久久黑人强伦姧人妻| 中文字幕在线观看第二页| 欧美大鸡巴爆草美女| 国产一国产一级毛片无码视频百度| 一区二区三区中文欧美| 久久久精品亚洲Av|