欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Hyper carbide = hyper alloy + cemented carbide

It is well known that there are two important performance indicators for hard metal alloys: hardness and strength. These two factors are often difficult to balance, much like a seesaw. However, the addition of rhenium to high-temperature alloys can significantly enhance the toughness and high-temperature deformation resistance of materials, including iron-based, nickel-based, and cobalt-based high-temperature alloys.

 

Characteristics of hyper?carbide

hyper?carbide?materials, built upon the foundation of general hard metal alloy constituents, incorporate one or several refractory high-temperature metallic components from hyper?alloys, such as rhenium, ruthenium, osmium, molybdenum, vanadium, tantalum, niobium, etc. This modification imparts exceptional characteristics including higher strength, hardness, and temperature resistance compared to conventional hard metal alloys.

One particularly notable effect is observed when trace amounts of rhenium are introduced into hard metal alloys. This addition significantly enhances and improves the physical properties of hard metal alloy materials, particularly in terms of red hardness and alloy stiffness (elastic modulus). Rhenium applies a solid solution strengthening effect to the existing binding phase metals (iron, cobalt, nickel series) in hard metal alloys, particularly in the realm of high-speed cutting and precision machining of challenging-to-process materials like nickel-based high-temperature alloys, heat-resistant stainless steels, titanium alloys, tungsten-molybdenum-tantalum-niobium-zirconium-hafnium class special alloys. The utilization of cutting tools and precision molds made from these newly developed hyper?carbide?materials presents an extraordinary cost-performance advantage, replacing conventional tools in a remarkable manner.

 

The Principle of Rhenium Enhancement in carbide?Performance

People have come to recognize that adding rhenium to the binder of WC-based hard metal alloys can enhance their high-temperature performance.

Figure 1 schematically depicts the W-Co-Re-C phase diagram under conditions of 9wt% Re + 6wt% Co. This diagram, based on literature and experimental results, is compared with a redrawn phase diagram of WC-Co under conditions of 10wt% Co. Considering that the density of Re is significantly higher than that of Co, the WC-Co-Re hard metal alloy with 9wt% Re and 6wt% Co contains almost the same proportion of binder phase in terms of volume as the WC-Co material with 10wt% Co.

From Figure 1, it is evident that the W-Co-Re-C phase diagram differs from the W-Co-C phase diagram. The following are characteristics of the W-Co-Re-C phase diagram:

Fig1 The W-Co-Re-C phase diagram with 9 wt% Re + 6 wt% Co (red line) compared to the W-Co-C phase diagram with 10 wt% Co (black line).
Fig1 The W-Co-Re-C phase diagram with 9 wt% Re + 6 wt% Co (red line) compared to the W-Co-C phase diagram with 10 wt% Co (black line).

Firstly, in the W-Co-Re-C phase diagram, all melting points shift towards higher temperatures. Therefore, compared to traditional WC-Co materials, WC-Co-Re hard metal alloys require sintering at higher temperatures.

Secondly, for WC-Co-Re hard metal alloys, the two-phase region without the η phase and free carbon slightly shifts towards the higher end at higher carbon contents. This shift is relatively minor but still needs to be considered in the preparation of WC-Co-Re hard metal alloys. It’s worth noting that the width of the two-phase regions in the W-Co-Re-C phase diagram is similar to that in the W-Co-C phase diagram.

Lastly, the addition of rhenium to the binder significantly expands the region where the equilibrium of WC + η phase + liquid phase exists at temperatures above approximately 1430°C. This implies that if medium- to low-carbon and low-carbon content WC-Co-Re hard metal alloys are rapidly cooled from the sintering temperature, they might contain the η phase instead of decomposing into thermodynamically stable WC + Co/Re mixtures. Therefore, post-sintering WC-Co-Re hard metal alloys must be cooled at relatively low cooling rates to ensure complete decomposition of the η phase.

Figure 2 illustrates this, showing that batches of WC-Co-Re with medium to low carbon content contain the encapsulated η phase after rapid cooling, while they don’t contain the η phase after slow cooling.

What is Hyper Carbide? 2
Fig2?Under conditions of cooling from the sintering temperature (1520°C) to 1300°C at different cooling rates: (a – cooling rate of 4°C/minute, b – cooling rate of 0.5°C/minute), the microstructure of a medium-grained WC-Co-Re hard metal alloy with 9wt% Re + 6wt% Co and a total carbon content of 5.45 wt%
Co to jest Hyper Carbide? 3
Fig3 Sintered at 1520°C, then slowly cooled to 1250°C, the microstructure of medium-grained WC-10%Co hard metal alloy (left) and medium-grained WC-Co-Re (containing 9wt% Re + 6wt% Co) hard metal alloy (right)

Figures 3 and 4 present the typical microstructures of medium-grained WC-Co-Re hard metal alloy, compared to traditional WC-Co materials prepared from the same level of WC powder. From Figure 3, it is evident that the microstructure of WC-Co-Re hard metal alloy is noticeably finer than that of traditional WC-Co hard metal alloy. Thus, rhenium serves as a potent inhibitor of WC grain growth, restraining the coarsening process of WC. According to research findings, rhenium tends to concentrate at the WC/binder grain boundaries. Therefore, it can be inferred that the role of inhibiting WC grain growth in WC-Co-Re materials is analogous to the inhibitory action of traditional grain growth inhibitors at WC-Co interfaces.

Sub-micron WC-Co-Re hard metal alloys are commonly used in high-temperature and high-pressure components, where the role of rhenium in inhibiting grain growth is crucial. This is significant as it eliminates the need to add conventional grain growth inhibitors to sub-micron WC-Co-Re hard metal alloys. Figures 4 and 5 depict the microstructure of sub-micron WC-Co-Re hard metal alloy without grain growth inhibitors, exhibiting fine and uniform particles without exceptionally large WC grains. The sintering temperature for this hard metal alloy is 1520°C, notably higher than the typical sintering temperature for sub-micron WC-Co alloys.

Co to jest Hyper Carbide? 4
Figure 4 shows the microstructures of medium-grained WC-Co-Re hard metal alloy with 9 wt% Re + 6 wt% Co (left) and sub-micron WC-Co-Re hard metal alloy with 5.5 wt% Re + 3.7 wt% Co
Co to jest Hyper Carbide? 5
Figure 5 displays the microstructure of sub-micron WC-Co-Re hard metal alloy with 5.5 wt% Re + 3.7 wt% Co.

 

Performance of hyper?carbide?WC-Co-Re

Research has revealed that WC-Co-Re hard metal alloys exhibit significantly improved physical and mechanical properties at high temperatures. The curves in Figure 6 indicate that the hardness of WC-Co-Re material remains more stable as the temperature decreases (20-800°C) compared to traditional WC-Co hard metal alloys. Operating temperatures of 300°C and 500°C are common for HPHT (High Pressure High Temperature) components. In comparison to conventional WC-Co materials, the hardness of WC-Co-Re hard metal alloy reduces by nearly two times at these two temperatures. Increased thermal hardness is crucial for manufacturing tools used for nickel-based high-temperature alloys or other heat-generating materials. These tools require cutting edges with high thermal stability and mechanical robustness.

Co to jest Hyper Carbide? 6

Fig. 6. The hardness variation with temperature when comparing sub-micron WC-Co-Re cemented carbide containing 5. 5 wt % Co + 3. 7 wt % Re with traditional sub-micron cemented carbide containing 6 wt % Co

Figure 6 illustrates the variation of hardness with temperature for sub-micron WC-Co-Re hard metal alloy containing 5.5 wt% Co + 3.7 wt% Re, compared to the traditional sub-micron hard metal alloy with 6 wt% Co.

Based on the previously mentioned higher thermal hardness of WC-Co-Re hard metal alloy, it can be inferred that Re-containing hard metal alloys exhibit improved high-temperature creep resistance. In fact, as depicted in Figure 7, the WC-Co-Re hard metal alloy achieves the same compressive stress rate value under a significantly higher load than conventional WC-Co material. This suggests that the Co-Re binder demonstrates significantly enhanced high-temperature creep performance.

Co to jest Hyper Carbide? 7

Figure 7 illustrates the relationship between strain rate and compressive stress for WC-Co-Re and WC-Co hard metal alloys at 800°C.

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

美女被插入小穴爆操视频| 欧美日韩久久一区二区三区| 大香蕉操逼小视频| 美女荒郊野外找男人靠逼| 大黑屌后入骚妇屁股| 免费观看的黄视频一级国产| 国产高清在线观看一区二区三区| 国产天美传媒剧免费观看| 操鸡巴奶子在线观看| 中文字幕av一区二区三区蜜桃| 日韩一区二区三区国色天香| 8050午夜三级的全黄| 国产又粗又猛又色又免费| 90岁肥老奶奶毛毛外套| av中文字幕一区二区精品久久| 国产欧美亚洲一区二区三| 中国女人日逼免费片| 在线精品亚洲观看不卡欧| 国产一国产一级毛片无码视频百度| 久久久国产系列丝袜熟女| 午夜性无码视频在线播放| 欧美老熟妇又粗又大| 国产精品午夜小视频观看| 咪咪爱一级特黄大片| 手机成人三级a在线观看| 老色鬼精品视频二区三区| 99久久99久久精品视频| 9999热精品免费视频| 青娱乐欧美性爱视频| 欧美日韩一区二区成人在线| 你懂的在线中文字幕一区| 国产熟女50岁一区二区| 大黑鸡巴操模特骚B| 鸡巴插进女人的逼里| 被大鸡巴操淫液视频| 国产精品视频美熟女一区二区| 男女边吃奶边做边爱视频| 天天爽夜夜爽夜夜爽一区| 国产精品免费第一区二区| 粉嫩小穴被大鸡巴操视频在线观看| 国产综合精品一区二区青青|