欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Zadziory w obróbce metali to problem, z którym spotyka si? ka?dy, np. przy wierceniu, toczeniu, frezowaniu, ci?ciu blachy itp. Jednym z zagro?eń zwi?zanych z zadziorami jest ?atwo?? ci?cia. Aby usun?? zadziory zwykle konieczne jest wykonanie dodatkowej operacji zwanej gratowaniem. Trzy etapy gratowania i wykańczania kraw?dzi cz??ci precyzyjnych mog? stanowi? 30% kosztu gotowych cz??ci. Ponadto wtórna operacja wykańczania jest trudna do zautomatyzowania, dlatego powstawanie zadziorów sta?o si? bardzo trudnym problemem.How to Effectively Deal with Burr 2

Here are all the machining problems that bothered us

How to Effectively Deal with Burr 3

B

How to solve burr

1. chemical deburring

Chemical deburring is the use of chemical energy for processing, chemical ions will adhere to the surface of the parts, forming a film with high resistance and low conductivity to protect the workpiece from corrosion, and the burr can be removed by chemical action because it is higher than the surface. This deburring method is widely used in pneumatic, hydraulic, engineering machinery and other fields.

2. high temperature deburring

First, put the parts to be deburred into the tight sealing chamber, and then put them into the hydrogen oxygen mixture with a certain pressure, ignite the mixture to explode, release heat, and burn off the burr of the parts without damaging the parts.

3.hobbing deburring

The parts and abrasives are put into the closed drum together. During the rotation of the drum, the dynamic torque sensor, parts and abrasives are grinded together to remove the burr. Abrasives can be quartz sand, sawdust, alumina, ceramics and metal rings, etc.

4.manual deburring

This method is more traditional and the most time-consuming and laborious. Mainly through manual use of steel file, sandpaper, grinding head and other tools for grinding. Now the most commonly used in production is trimming knife.

How to Effectively Deal with Burr 4

5. process deburring

Edge rounding can refer to all actions to remove the edge of metal parts. However, it is usually associated with the radius at which the part edge is created.

How to Effectively Deal with Burr 5

Corner rounding

Edge rounding is not simply to remove sharpness or burr, but to break the edge of metal parts to improve their surface coating and protect them from corrosion.

Rotary setback: suitable for laser cutting, stamping or machining the edge of parts.

How to Effectively Deal with Burr 6

Manual grinding machine: suitable for metal processing projects requiring grinding and edge rounding or deburring.

How to Effectively Deal with Burr 7

Burr in special difficult milling parts

In milling parts, deburring is more complex and costly, because multiple burrs are formed in different positions of different sizes. At this time, it is very important to choose the right process parameters to minimize the burr size.

main factors affecting burr formation in end milling

① Milling parameters, milling temperature and cutting environment have certain influence on the formation of burr. The influence of some main factors such as feed speed and milling depth is reflected by the plane cutting angle theory and the tool tip exit sequence EOS theory.

How to Effectively Deal with Burr 8

② The better the plasticity of the workpiece material, the easier it is to form I-type burr. In the process of end milling brittle materials, if the feed rate or plane cutting angle is large, it is conducive to the formation of type III burr (defect).

③ When the angle between the end face of the workpiece and the machined plane is greater than the right angle, the formation of burr can be restrained due to the increased support stiffness of the end face.

④ The use of milling fluid can prolong the tool life, reduce the tool wear, lubricate the milling process, and reduce the burr size.

⑤ Tool wear has a great influence on the formation of burr. When the tool is worn to a certain extent, the arc of the tool tip increases, not only the size of the burr in the exit direction of the tool increases, but also the burr in the cut in direction

⑥ Other factors such as tool material also have some influence on the formation of burr. Under the same cutting conditions, diamond tool is more conducive to restrain burr formation than other tools.

Using appropriate cutting conditions to restrain burr

It is an effective method to eliminate the space of burr in order to restrain the burr. For example, chamfering can be used to reduce the space before cutting.

In order to reduce the cutting residue as much as possible, the most suitable tool and cutting condition must be selected. The cutting tool with large rake angle and sharp cutting edge is selected to improve the cutting speed and cutting characteristics. Especially in finishing cutting, the minimum cutting depth and feed must be used.

The space between the tool and the workpiece determines the size of the burr. Let’s take a look at the following diagram.

How to Effectively Deal with Burr 9

In fact, burr can not be avoided in the process of processing, so it is better to solve the burr problem from the process and avoid excessive manual intervention. The use of chamfered end milling cutter can reduce the burr space, effectively remove burr, and is also a very suitable method to remove burr.

操国产骚逼逼逼逼逼逼逼| 性爱大鸡吧喷水视频| 日韩素人精品亚洲热一区| 久久99热精品在线观看| 久久高清中文字幕第一页| 日韩精品高清在线| 色老头av亚洲三区三区| 操俄罗斯美女bb| 想被操在线啊啊啊啊| 操的我的逼逼好爽好多水| 啊灬啊别停灬用力啊男男在线观看| 捆绑调教白浆一区二区三区| 精品区在线导航视频观看| 美女大鸡操很多水在线看| 欧美十八一区二区三区| 亚洲AV天堂一区二区香蕉| 我想看操小嫩逼大片| 2021最新热播国产一区二区| 久久综合久久久久综合大| 黑人大屌爆操骚货| 中文字幕一区二区三区中文字幕| 日韩av大片一区二区三区| 男人的下面进女人的下面在线观看| 少妇毛片一区二区三区免费视频| 一区二区三区 日韩在线| 无码爆一二三区免费视频| 操大屌粉的小穴视频| 无码成人一区二区| 日韩成人伦理片在线观看| 亚洲Av无码专区一区二区三区| 99亚洲精品高清一二区| 国产亚洲一区二区手机在线观看| 韩美国男人叉女人| 最新的精品亚洲一区二区| 性色av少妇一区二区三区多人| 国产精品视频美熟女一区二区| 把女生操出水的视频| 区国产精品搜索视频| 骚片视频在线观看| 大鸡巴日大鸡巴在线观看| 欧美精品一区二区三区四区五区|