欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Machine tool compensation, a critical technology, is needed to correct machining errors and ensure machining accuracy. Below are the main types of machine tool compensation.

Because machine tools have systematic mechanical-related deviations that can be recorded by the system. However, due to environmental factors such as temperature or mechanical load, these deviations may still occur or increase during subsequent use.

What is Machine Tool Compensation? 2

Backlash Compensation

When transmitting force between the moving components of a machine tool and its driving components—such as ball screws—interruptions or delays can occur. This is because a completely gap-free mechanical structure would significantly increase machine tool wear and is also difficult to achieve from a technical standpoint. Mechanical gaps cause deviations between the motion path of the axis/spindle and the measurements from the indirect measurement system. This means that once the direction changes, the axis will move either too far or not far enough, depending on the size of the gap. The worktable and its associated encoder are also affected: if the encoder position leads the worktable, it reaches the commanded position prematurely, meaning the actual distance moved by the machine tool is shortened. During machine operation, by using the backlash tool compensation function on the corresponding axis, the previously recorded deviation is automatically activated when the direction changes, and this deviation is added to the actual position value.

 

Screw Pitch Error Compensation

The measurement principle of indirect measurement in CNC control systems is based on the assumption that the pitch of the ball screw remains constant over its effective travel range. Therefore, in theory, the actual position of the linear axis can be derived from the motion information of the drive motor.。

What is Machine Tool Compensation? 3

However, manufacturing errors in the ball screw can lead to deviations in the measurement system (also known as screw pitch errors). Measurement deviations (depending on the measurement system used) and installation errors of the measurement system on the machine tool (also referred to as measurement system errors) may further exacerbate this issue. To compensate for these two types of errors, an independent measurement system (such as laser measurement) can be used to measure the natural error curve of the CNC machine tool. The required tool compensation values are then saved in the CNC system for tool compensation.

What is Machine Tool Compensation? 4

Friction Compensation (Quadrant Error Compensation) and Dynamic Friction Compensation

Quadrant error compensation (also known as friction compensation) is suitable for all the aforementioned scenarios to significantly improve contour accuracy when machining circular profiles. The reason is as follows: During quadrant transitions, one axis moves at the maximum feed rate while the other axis remains stationary. As a result, the different friction behaviors of the two axes can lead to contour errors. Quadrant error tool compensation effectively reduces this error and ensures excellent machining results. The density of ?? compensation pulses can be set based on an acceleration-related characteristic curve, which can be determined and parameterized through roundness testing. During roundness testing, deviations between the actual position of the circular contour and the programmed radius (especially during direction changes) are quantified and graphically displayed on the human-machine interface.

In newer versions of the system software, the integrated dynamic friction tool compensation function dynamically compensates for friction behavior at different machine speeds, reducing actual machining contour errors and achieving higher control accuracy.

 

Sag and Angular Error Compensation

What is Machine Tool Compensation? 5

If the weight of individual components of the machine tool causes displacement or tilting of moving parts, sag tool compensation is required because it can lead to sagging of relevant machine tool parts, including the guiding system. Angular error tool compensation is used when moving axes are not correctly aligned with each other (e.g., not perpendicular). As the offset from the zero position increases, the positional error also increases. Both types of errors are caused by the machine tool’s own weight or the weight of the tool and workpiece. During commissioning, the measured tool compensation values are quantified and stored in the SINUMERIK system in a form such as a compensation table, corresponding to specific positions. During machine operation, the positions of the relevant axes are interpolated based on the stored tool compensation values. For each continuous path movement, there is a base axis and a compensation axis.

 

Temperature Compensation

Heat can cause expansion in various parts of the machine tool. The extent of expansion depends on factors such as the temperature and thermal conductivity of each part. Different temperatures may cause changes in the actual positions of the axes, which can negatively impact the accuracy of the workpiece being machined. These changes in actual values can be offset through temperature tool compensation. Error curves for each axis at different temperatures can be defined. To ensure accurate compensation for thermal expansion, temperature compensation values, reference positions, and linear gradient parameters must be continuously transferred from the PLC to the CNC control system via functional blocks. Unexpected parameter changes are automatically corrected by the control system to prevent machine overload and activate monitoring functions.

 

Volumetric Compensation System (VCS)

tool compensation

The positions of rotary axes, their mutual ?? compensation, and tool orientation errors can lead to systematic geometric errors in components such as turrets and rotary heads. Additionally, small errors may occur in the guiding systems of feed axes in every machine tool. For linear axes, these errors include linear position errors, horizontal and vertical straightness errors; for rotary axes, pitch, yaw, and roll errors may arise. Other errors, such as perpendicularity errors, can occur when aligning machine components. For example, in a three-axis machine tool, this can result in up to 21 geometric errors at the tool center point (TCP): six error types per linear axis multiplied by three axes, plus three angular errors. These deviations collectively form the total error, also known as the volumetric error.

 

The volumetric error describes the deviation between the actual TCP position of the machine tool and the TCP position of an ideal, error-free machine tool. SINUMERIK solution partners can determine volumetric errors using laser measurement equipment. Measuring errors at a single position is insufficient; errors across the entire machining volume must be measured. Typically, measurement values for all positions are recorded and plotted as curves, as the magnitude of errors depends on the position of the relevant feed axis and the measurement location. For example, deviations in the x-axis may vary when the y-axis and z-axis are in different positions—even at nearly the same x-axis position. With “CYCLE996 – Motion Measurement,” rotary axis errors can be determined in just a few minutes. This allows for continuous monitoring of machine tool accuracy and, if necessary, corrections can be made even during production.

 

Deviation Compensation (Dynamic Feedforward Control)

Deviation refers to the discrepancy between the position controller and the standard during the movement of a machine tool axis. Axis deviation is the difference between the target position and the actual position of the axis. Deviation causes speed-related unnecessary contour errors, especially when the contour curvature changes, such as in circles, squares, or other shapes. Using the NC advanced language command FFWON in the part program, speed-related deviations can be reduced to zero during path movement. Feedforward control improves path accuracy, resulting in better machining outcomes.

What is Machine Tool Compensation? 6

FFWON: Command to activate feedforward control

FFWOFF: Command to deactivate feedforward control

 

Electronic Counterbalance Compensation

In extreme cases, to prevent damage to the machine tool, tool, or workpiece caused by axis sagging, the electronic counterbalance function can be activated. In load axes without mechanical or hydraulic counterbalances, a vertical axis may unexpectedly sag once the brake is released. After activating the electronic counterbalance, unintended axis sagging can be compensated. Upon releasing the brake, a constant balancing torque maintains the position of the sagging axis.

?? ???

???? ???? ????. ?? ???? * ? ???? ????

婷婷六月视频在线观看-久久亚洲综合国产精品| 欧美精品国产白浆久久正在-国产精彩视频一区二区三区| 熟女熟妇伦51788-国产av在线播放一区二区三区| 人妻日韩精品中文字幕图片-麻豆极度性感诱人在线露脸| av网址在线直接观看-黄色av全部在线观看| 久久免费观看归女高潮特黄-黄色av一本二本在线观看| 国产av一区二区三区日韩接吻-av网址在线播放网站| 交换朋友的妻子中文字幕-日本美女8x8x8x8| 久久夜色精品亚洲噜国产av-大香蕉伊人猫咪在线观看| 五月婷婷免费观看视频-男人操女人下面视频在线免费看| 在线免费观看黄片喷水-国产精品白丝网站在线观看| 99久热精品免费观看四虎-亚洲天堂精品视频在线| 国产福利视频一区二区三区-日韩人妻中文视频精品| 国产一区二区三区噜噜-精品久久亚洲一区二区欧美| 欧美精品一区二区不卡-精品国产一区二区三区香蕉网址| 亚洲欧美精品在线一区-99热国产在线手机精品99| 国产精品中出久久久蜜臀-久久久中国精品视频久久久| 国产在线一区二区三区欧美-久久偷拍精品视频久久| 日韩精品一区二区三区粉嫩av-欧美亚洲国产中文字幕| 小12萝自慰喷水亚洲网站-chinese偷拍一区二区三区| 人妻互换精品一区二区-夜夜爽一区二区三区视频| 久久精品国产96精品-日韩人成理论午夜福利| 中文字幕亚洲中文字幕-丰满老妇伦子交尾在线播放| 日韩综合精品一区二区-丝袜美腿熟女人妻经典三级| 免费午夜福利在线观看-黄色日本黄色日本韩国黄色| 国产剧情av中文字幕-五月婷婷在线手机视频| 深夜三级福利在线播放-日韩精品一区二区在线天天狠天| 中文字幕亚洲中文字幕-丰满老妇伦子交尾在线播放| 免费午夜福利视频在线观看-亚洲成人日韩欧美伊人一区| 久色高清精品在线国产-国产精品视频一区三区四区| mm在线精品视频在线观看-欧美国产日韩在线一区二区三区| 人妻丝袜中文字幕在线视频-亚洲成av人片一区二区三区| 国内精产熟女自线一二三区-六月丁香婷婷在线观看| 国产精品一区二区在线免费-久久精品国产亚洲av热明星| 国产一区二区三区噜噜-精品久久亚洲一区二区欧美| 成人免费黄色在线网站-日韩精品一区二区三区四区在线| 国产美女网站在线观看-国产精品亚洲综合网69| 欧美伦乱淫老妇女激情吧-亚洲女邻居精品二区久久| 国产老熟女激情小视频-成人一区二区人妻不卡视频| 99在线观看精品视频免费-国产极品一区二区三区四区| 免费午夜福利视频在线观看-亚洲成人日韩欧美伊人一区|