欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

金屬加工におけるバリは、穴あけ、旋削、フライス加工、板の切斷など、誰もが遭遇する問題です。バリの危険性の 1 つは、切斷されやすいことです。バリを除去するには、通常、バリ取りと呼ばれる二次加工を行う必要があります。精密部品の 3 つのバリ取りとエッジ仕上げが完成部品コストの 30% を占める可能性があります。また、二次仕上げ作業(yè)は自動化が難しく、バリは非常に難しい問題となっています。How to Effectively Deal with Burr 2

Here are all the machining problems that bothered us

How to Effectively Deal with Burr 3

B

How to solve burr

1. chemical deburring

Chemical deburring is the use of chemical energy for processing, chemical ions will adhere to the surface of the parts, forming a film with high resistance and low conductivity to protect the workpiece from corrosion, and the burr can be removed by chemical action because it is higher than the surface. This deburring method is widely used in pneumatic, hydraulic, engineering machinery and other fields.

2. high temperature deburring

First, put the parts to be deburred into the tight sealing chamber, and then put them into the hydrogen oxygen mixture with a certain pressure, ignite the mixture to explode, release heat, and burn off the burr of the parts without damaging the parts.

3.hobbing deburring

The parts and abrasives are put into the closed drum together. During the rotation of the drum, the dynamic torque sensor, parts and abrasives are grinded together to remove the burr. Abrasives can be quartz sand, sawdust, alumina, ceramics and metal rings, etc.

4.manual deburring

This method is more traditional and the most time-consuming and laborious. Mainly through manual use of steel file, sandpaper, grinding head and other tools for grinding. Now the most commonly used in production is trimming knife.

How to Effectively Deal with Burr 4

5. process deburring

Edge rounding can refer to all actions to remove the edge of metal parts. However, it is usually associated with the radius at which the part edge is created.

How to Effectively Deal with Burr 5

Corner rounding

Edge rounding is not simply to remove sharpness or burr, but to break the edge of metal parts to improve their surface coating and protect them from corrosion.

Rotary setback: suitable for laser cutting, stamping or machining the edge of parts.

How to Effectively Deal with Burr 6

Manual grinding machine: suitable for metal processing projects requiring grinding and edge rounding or deburring.

How to Effectively Deal with Burr 7

Burr in special difficult milling parts

In milling parts, deburring is more complex and costly, because multiple burrs are formed in different positions of different sizes. At this time, it is very important to choose the right process parameters to minimize the burr size.

main factors affecting burr formation in end milling

① Milling parameters, milling temperature and cutting environment have certain influence on the formation of burr. The influence of some main factors such as feed speed and milling depth is reflected by the plane cutting angle theory and the tool tip exit sequence EOS theory.

How to Effectively Deal with Burr 8

② The better the plasticity of the workpiece material, the easier it is to form I-type burr. In the process of end milling brittle materials, if the feed rate or plane cutting angle is large, it is conducive to the formation of type III burr (defect).

③ When the angle between the end face of the workpiece and the machined plane is greater than the right angle, the formation of burr can be restrained due to the increased support stiffness of the end face.

④ The use of milling fluid can prolong the tool life, reduce the tool wear, lubricate the milling process, and reduce the burr size.

⑤ Tool wear has a great influence on the formation of burr. When the tool is worn to a certain extent, the arc of the tool tip increases, not only the size of the burr in the exit direction of the tool increases, but also the burr in the cut in direction

⑥ Other factors such as tool material also have some influence on the formation of burr. Under the same cutting conditions, diamond tool is more conducive to restrain burr formation than other tools.

Using appropriate cutting conditions to restrain burr

It is an effective method to eliminate the space of burr in order to restrain the burr. For example, chamfering can be used to reduce the space before cutting.

In order to reduce the cutting residue as much as possible, the most suitable tool and cutting condition must be selected. The cutting tool with large rake angle and sharp cutting edge is selected to improve the cutting speed and cutting characteristics. Especially in finishing cutting, the minimum cutting depth and feed must be used.

The space between the tool and the workpiece determines the size of the burr. Let’s take a look at the following diagram.

How to Effectively Deal with Burr 9

In fact, burr can not be avoided in the process of processing, so it is better to solve the burr problem from the process and avoid excessive manual intervention. The use of chamfered end milling cutter can reduce the burr space, effectively remove burr, and is also a very suitable method to remove burr.

99久久婷婷国产亚洲综合精品| 青草草在线视频免费视频| 在线观看免费视频你懂的| 久久99精品国产麻豆婷婷洗澡| 亚洲欧美日韩熟女第一页| 日韩精品亚洲精品国产精品| 嫩呦国产一区二区三区av| 成人精品一区二区三区综合| 精品国产亚洲av久一区二区三区| 日本熟妇熟女久久综合| 91麻豆视频国产一区二区| 亚洲一区二区三区四区| 东京热男人的天堂社区| 激情五月天免费在线观看| 日韩高清毛片免费观看| 少妇丰满a一区二区三区| 亚洲成人免费天堂诱惑| 亚洲最新的黄色录像在线| 久热久热精品视频在线观看| 九九热视频经典在线观看| 暴力三级a特黄在线观看| 欧美在线视频一区观看| 热情的邻居在线中文字幕| 91免费精品国自产拍偷拍| 国产精品夜色一区二区三区不卡| 国产精品久久男人的天堂| 亚洲最大的中文字幕在线视频| 中文字幕亚洲视频一区二区| 日韩在线欧美一区二区| 色哟哟国产精品免费视频| 成年女人午夜在线视频| 一区二区不卡免费观看免费| 99久久免费看国产精品| 日本欧美一区二区三区就| 亚洲一区二区三区国产| 日韩欧美中文字幕人妻| 日韩人妻有码一区二区| 国产一区二区三中文字幕| 久久亚洲精品中文字幕| 风间中文字幕亚洲一区| 欧美黑人黄色一区二区|