欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Shape tolerance refers to the allowable variation of the shape of a single material element, including roundness, cylindricity, planarity, line profile, face profile and straightness. It is the geometrical tolerance of the tested element, which is independent without any error to the datum.

What You Should Know about Tolerance 2

Selection principle

On the premise of meeting the functional requirements of parts, considering the process economy and detection conditions, the most economical tolerance value is selected. It is also necessary to consider the functional requirements, structure and rigidity of the parts, determine the tolerance value according to the tolerance table, and consider the coordination relationship between the tolerance values.

The given shape tolerance of the same element shall be less than the position tolerance, and the shape tolerance of cylindrical parts shall be less than the dimension tolerance. Generally, 30% of the dimension zone shall be selected in the sample stage, 40% in the small batch stage, and 60% to 80% in the large batch stage, depending on the difficulty of processing the workpiece.

Coordinate the relationship with the surface roughness. The surface roughness value is 20% to 30% of the shape error.

Flatness tolerance level shall be lower than perpendicularity and parallelism tolerance level; roundness tolerance level shall be lower than radial circular run out tolerance level.

The problem composition of shape tolerance:

  1. Cylindricity out of tolerance
What You Should Know about Tolerance 3
  • Straightness and flatness out of tolerance
What You Should Know about Tolerance 4

3.Out of tolerance of line profile and surface profile

What You Should Know about Tolerance 5

Cause analysis:

Irregular operation of employees

1. The installation error of the tool and workpiece is not verified when the tool is replaced

2. Rough operation when changing workpieces

Caused by machine

1. When the spindle bearing of the machine tool is worn or loose due to the rotation error of the machine tool, the out of tolerance of roundness, cylindricity and flatness will occur;

2. If the bearing of the lathe machining center is worn or loose, the roundness and cylindricity will be out of tolerance;

3. The geometric relationship between the feed motion and the main motion is not correct: if the tool’s motion path is not vertical to the workpiece’s rotation axis, cylindricity error will be generated, and if the uneven line, flatness error will be generated;

4. The straightness error of machine tool guide rail in horizontal or vertical plane causes roundness or flatness error in machining indication;

Material cause

1. The shape and size change caused by the eccentric workpiece processing, and the cylindricity is mostly out of tolerance;

2. Because of the change of workpiece material, the hardness of material is mostly related to heat treatment;

3. When the residual stress of workpiece is released, the thickness of workpiece is not consistent, which has a great influence, and the majority of workpiece is blank;

Caused by process design system

1. The mechanical deformation of the process system and the thermal deformation of the process system are not fully considered in the process design.

2. It is difficult to machine materials, and the tool durability is not fully considered.

3. The tool is not rigid enough.

4. Environmental temperature difference is also a major factor.

Develop Interim Measures

Out of tolerance of shape and size caused by improper operation of operators

On site training and guiding the operation methods of the processing personnel, so that the operators can operate correctly and complete the parts processing

Shape and size out of tolerance caused by machine

1. If the order is urgent and there is no maintenance time, the dial indicator can be used to adjust the bearing clearance and complete the emergency production order.

2. Check whether the temperature rise of each part of the machine tool is consistent, whether it is due to the change of the temperature rise of the machine tool, the change of the original static geometric dimension of the machine tool, and the change of the processing track. The machine tool can reach the heat balance state by preheating the machine tool. If not, change the program control value first to complete the emergency order.

3. The straightness error of machine tool guide rail in horizontal or vertical plane causes roundness or flatness error in machining indication, and the relative displacement direction is adjusted from tangent direction to normal direction.

Develop permanent measures

The shape and size out of tolerance caused by the operator’s irregular operation.

Standardize the operation steps, standardize the placement standards of workpieces, and form the operation instructions to guide the standardized production of workers.

Shape and size out of tolerance caused by machine

1. Check the main shaft bearing, correct or replace the high-precision bearing, and improve the assembly quality of the main engine;

2. 2. Correct the static geometric dimension of machine tool installation;

Out of tolerance of shape and size caused by materials

1. Calculation of workpiece eccentricity and reasonable counterweight

2. Whether the heat treatment process of workpiece material is reasonable and in accordance with the standard

3. Improve workpiece clamping conditions through tooling design

Shape and size out of tolerance caused by process system

Standardized control of documents: tool design, whether machining error calculation is reasonable, whether cutting parameters are reasonable, tool geometry, whether stress calculation is accurate in machining process, whether static stress of process system is reasonable, whether arrangement of process route is reasonable, whether machining structure of parts has concentration of residual stress, whether adopting reasonable heat treatment process, workpieces Whether there is residual stress in the shaping process.

What You Should Know about Tolerance 6
亚洲精品自拍偷拍| 亚洲 欧美 日韩 主播| 人妻少妇精品视频12p| 精品久久久久中文字幕人| 国产精品免费久久久久久| 亚洲综合极品香蕉久久网| 丰满少妇被强入在线观看| 亚洲综合色88综合天堂| 亚洲乱码专区一区二区三区四区| 精品无码一区二区三区无码| 少妇无码一区二区二三区| 中文有码无码人妻在线看| 小穴抽插流水视频| 美女被插入小穴涩涩视频| 亚洲乱熟女一区二区三区| 国产精品无码av在线一区| 中文字幕av一区二区三区哈| 成人 在线 欧美 日韩| 在线观看国产黄色| 国产精品毛片无遮挡高清| 欧美精品一区二区三区四区五区| 骚片视频在线观看| 男人几把操女人嫩穴| 亚洲成国产人片在线观看| 好想插进去捅一捅| 神马我不卡手机在线观看| 操大美女逼射精视频| 男生插女生下面流出白色精液视频| 日本免费精品一区二区三区四区| 欧美亚洲另类天天综合网| 国产成人精品区在线观看| 精品福利一区二区三区在线观看| 白嫩在线亚洲观看| 中文欧美亚洲欧日韩| 一级美女插逼百度| 欧美男女舔逼舔鸡巴视频| 插插插插插插插插插插插| 爆操大奶子美女视频| 中文有码无码人妻在线看| 夜色成人免费观看| 韩国三级a视频哪里看|