欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Eine Reibahle ist ein rotierendes Werkzeug mit einem oder mehreren Z?hnen, das zum Schneiden dünner Metallschichten auf der bearbeiteten Oberfl?che eines Lochs verwendet wird. Pr?zise Abmessungen und Formen k?nnen durch Reiben von L?chern erreicht werden.

Reamers are employed on workpieces with pre-drilled (or reamed) holes to enhance the machining accuracy and reduce surface roughness. They are specialized tools for finishing and semi-finishing hole processing, with typically small machining allowances.

Unlike a single-blade cut in precision boring, reamers have 4-8 cutting edges, resulting in higher efficiency and precision. The presence of cutting edges in reamers contributes to better surface roughness.

Equipped with one or more teeth, reamers are used for reaming holes in workpieces that have been previously drilled (or enlarged). Their primary purpose is to improve the machining accuracy of holes and reduce surface roughness. These tools are suitable for precision and semi-precision hole processing, typically involving minimal machining allowances.

Due to the existence of a dull rounded cutting edge in reamers and a finishing edge, coupled with a back surface with a 0.03 to 0.05mm cutting edge, they exert significant squeezing force. As a result, the reaming process involves a combination of cutting and extrusion.

Reamers have a maximum diameter size of 30mm and a minimum diameter size of 2mm. The precision levels for reamers include D4, H7, H8, H9, among others. Diameters are commonly available in sizes such as 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, and so on.

reamer

Types of reamer

Manual reamer

A manual reamer is used in conjunction with a tap wrench or a tap handle. However, it can also serve as a machine reamer when employed for final precision machining. When mounted on machinery, it is advisable to conduct the machining at low speeds.

What is Reamer? 2

 

?Taper reamer

This type of reamer is designed for precision machining of holes with the same taper for locating pins. Standard products with a 1/50 taper are equipped with a straight blade.

What is Reamer? 3

Machine reamer

This is a reamer widely used for precision hole machining on machine tools. It comes in various sizes, with a cutting angle of approximately 45 degrees.

What is Reamer? 4

What is Reamer? 5

?Bridge reamers

This is a correction-type precision reamer, suitable for correcting misaligned holes for dowels or pins, or for hole?enlargement.

What is Reamer? 6

Single-flute reamer

Processing holes can achieve higher geometric accuracy and lower surface roughness values. When machining with a single-blade reamer, it can guide itself using the pre-machined hole, increasing the rigidity of the tool. This allows for obtaining higher geometric accuracy in a single operation, ensuring the roundness and cylindricity of the hole. The process is straightforward and easy to master.

What is Reamer? 7

Spiral-fluted reamer

The cutting action is light, rapid, smooth, with excellent chip evacuation, resulting in extended tool life and high-quality hole reaming. This type of reamer is commonly used for reaming deep holes or holes with interrupted surfaces (such as those with axial grooves). Spiral fluted reamers come in both right-hand and left-hand varieties.

Right-hand spiral:?Chips are expelled towards the shank direction, making it suitable for blind-hole machining. However, during reaming, axial and feed direction forces are the same, which may lead to automatic feeding, affecting machining quality. It may also cause the reamer to disengage from the machine spindle and get stuck in the workpiece. Therefore, it is advisable to use a small cutting amount.

Left-hand spiral:?Chips are directed along the feed direction, making it suitable for through-hole reaming. Axial forces press against the machine spindle, providing a more secure reamer clamping.

Adjustable reamer

As shown in Figure (c), the adjustable reamer’s blade diameter can be finely adjusted multiple times, allowing for reuse and significantly reducing reamer wear and processing costs.

 

Selection of cutting angles of reamers

The recommended ranges for the front and back angles are shown in Table 1.

Fig.1 The selection of front and back angles for the reamer

What is Reamer? 8

Cutting cone angle

The cutting cone angle 2φ mainly influences the magnitude of feed resistance, tool life, hole machining accuracy, and surface roughness. When the cutting cone angle is small, the feed force is low, and the reamer exhibits good guidance during entry. However, due to the small cutting thickness, significant deformation occurs. Additionally, the increased cutting width makes chip rolling and evacuation challenging, prolonging the entry and exit times. Therefore, to reduce labor intensity and minimize feed force, a larger φ value can be selected to decrease cutting length and maneuvering time. For machining steel, a value of φ is taken as 30°. For machining brittle materials such as cast iron, a range of 6° to 10° is used, while for blind-hole machining, φ is set at 90°.

Rake angle

As shown in Figure 5-70, the cutting edge of the high-speed steel straight-fluted reamer is depicted, and its rake angle (λs) is generally set between 15° and 20°. For the manufacturing of cemented carbide reamers, λs is typically set at 0°. When reaming blind holes, reamers with rake angles are still used, but a countersink hole is machined at the end of the reamer to accommodate the chips.

What is Reamer? 9

Fig2?The rake angle of the reamer

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

91精品捆绑蜜桃| 非洲人粗大长硬配种视频| 啊啊啊男女激情插插视频| 欧美综合区自拍亚洲综合| 国产高清第一区第二区第一页| 亚洲av午夜一区二区| 亚洲欧美一区二区三区在| 日韩欧美一区二三区风间由美| 欧美性爱撅臀插入啪啪啪| 国产一级a不收费| 精品久久久久亚洲中文字幕| 爆乳喷奶水无码正在播放| 五月天国产成人免费视频| 免费看看小骚逼逼| 男女真人牲交高潮全过程| 亚洲AV无码一区二区三区系列| 操女人b直播软件| 啊啊好想被大鸡巴操视频| 中日韩中文字幕无码一本| 国产女明星一级毛片| 几巴怪物操逼视频| 老熟女被大鸡巴干| 日本熟人妻中文字幕在线| 日本亚洲免费不卡| 深插巴西美女的逼| 欧美一区二区三区男人的天堂| 国产高清一区二区三区四区色| 国产高清在线观看一区二区三区| 男人天堂av在线免费看| 久久久一区二区三区日本| 玩弄邻居少妇呻吟11p| 久久久久黑人强伦姧人妻| ai换脸久久一区二区亚洲av| 日本黄色美女射精| 美女让我插她的骚逼| 中文字幕欧美中日韩精品| 好爽轻点太大了太深了视频| 久久国产精品二卡| 亚洲国产成人久久成人52| 中文无码av动作片| 国奴精品毛片av一区二区三区|