欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

In mechanical machining, the cutter entry method of the milling cutter directly affects the machining quality, tool life, and the integrity of the workpiece. Improper entry methods may lead to tool wear, workpiece damage, or even machining failure. Therefore, mastering different milling cutter entry methods and their applicable scenarios is crucial. Below are seven common milling cutter entry methods, along with their usage techniques and a detailed analysis of the advantages and disadvantages of each method.

 

Pre-Drilling EntryDetailed Applications of 7 Common Milling Cutter Entry Methods 2

Characteristics: One of the safest cutter entry methods

Applicable Scenarios: Machining materials prone to chip accumulation

Operation Method: Pre-drill a hole in the workpiece (5%-10% larger than the end mill diameter), then enter the milling cutter through the hole.

Advantages:

Prevents premature tool wear

Ensures smooth chip evacuation, reducing the risk of chip accumulation and tool breakage

Particularly suitable for machining materials like aluminum and copper that tend to stick to the tool

 

Nachteile:

Additional Process: Requires an extra pre-drilling step, increasing machining time and cost.

Precision Limitations: The diameter and position of the pre-drilled hole must be precise; otherwise, it may affect subsequent milling accuracy.

Unsuitable for Thin-Walled Workpieces: Pre-drilling may cause deformation or damage to thin-walled workpieces.

Material Waste: Pre-drilling removes some material, which may not be suitable for scenarios requiring high material utilization.

 

Helical EntryDetailed Applications of 7 Common Milling Cutter Entry Methods 3

Characteristics: Safe and efficient

Applicable Scenarios: High-precision machining, such as aerospace and medical device manufacturing

Operation Method: Use a corner-radius end mill to enter the workpiece gradually along a helical path. During programming, the helical diameter should be 110%-120% of the cutting insert diameter.

Advantages:

Reduces tool wear and breakage risk

Provides excellent surface finish

Suitable for deep cavity machining and complex contours

 

Nachteile:

Complex Programming: Requires precise CNC programming, demanding higher technical skills from operators.

Longer Machining Time: The helical path is longer, potentially increasing machining time.

High Tool Cost: Requires high-quality corner-radius end mills, increasing tool costs.

Unsuitable for Shallow Grooves: In shallow groove machining, the advantages of helical entry are less pronounced and may reduce efficiency.

 

Ramp EntryDetailed Applications of 7 Common Milling Cutter Entry Methods 4

Characteristics: Efficient with minimal impact on workpiece deformation

Applicable Scenarios: Contour machining, pocket machining

Operation Method: The milling cutter enters the workpiece at an angle (usually 1°-10°) and gradually increases the cutting depth.

Advantages:

Reduces axial force, minimizing workpiece deformation risk

Improves dimensional accuracy

Suitable for machining high-strength materials

 

Nachteile:

Complex Tool Forces: Ramp cutter entry applies multiple torsional forces on the tool, potentially leading to fatigue damage.

Chip Evacuation Issues: Poor tool design may result in poor chip evacuation, affecting machining quality.

Angle Selection Difficulty: Requires precise angle selection based on material properties; otherwise, machining effectiveness may be compromised.

Unsuitable for Brittle Materials: Brittle materials may develop cracks or chipping during ramp entry.

 

Circular EntryDetailed Applications of 7 Common Milling Cutter Entry Methods 5

Characteristics: Smooth cutter entry, reducing impact

Applicable Scenarios: Mold manufacturing, 3D contour machining

Operation Method: The milling cutter enters the workpiece from the side along a curved path, gradually increasing the load and decreasing it upon exit.

Advantages:

Avoids impact loading, extending tool life

Improves surface finish and machining efficiency

Suitable for complex surface machining

 

Nachteile:

Complex Programming: Requires precise curved path programming, demanding higher CNC system capabilities.

Long Tool Path: The circular entry path is longer, potentially increasing machining time.

Unsuitable for Narrow Grooves: Circular entry may not be feasible for narrow groove machining, limiting its application.

Concentrated Tool Wear: Circular cutter entry may cause concentrated wear on a specific part of the tool, affecting its lifespan.

 

Plunge Entry

Characteristics: Simple but high-risk

Applicable Scenarios: Machining with center-cutting tools

Operation Method: The milling cutter enters the workpiece vertically from the top.Detailed Applications of 7 Common Milling Cutter Entry Methods 6

Advantages:

Simple operation, suitable for quick machining

Applicable to center-cutting tools like drills

 

Nachteile:

High Tool Breakage Risk: Plunge entry is prone to tool breakage, especially when machining hard materials.

Poor Chip Evacuation: Chip evacuation is difficult, leading to chip accumulation and affecting machining quality.

High Workpiece Damage Risk: Plunge cutter entry may cause surface damage or deformation of the workpiece.

Unsuitable for Deep Grooves: In deep groove machining, plunge entry poses higher risks and is more likely to damage the tool.

 

Straight-Line Side Entry

Characteristics: Simple and direct, but causes significant tool wear

Applicable Scenarios: Simple cutting operations

Operation Method: The milling cutter enters the workpiece from the side and gradually increases the cutting depth.Detailed Applications of 7 Common Milling Cutter Entry Methods 7

Advantages:

Simple operation, suitable for low-precision machining

Effectively resolves tool entry difficulties

 

Nachteile:

Severe Tool Wear: Straight-line side entry causes significant tool wear, especially when machining high-strength materials.

Feed Rate Limitation: The feed rate must be reduced by 50% during cutter entry, affecting machining efficiency.

Chip Evacuation Issues: Poor chip evacuation may lead to tool breakage or workpiece damage.

Unsuitable for Complex Contours: Straight-line side entry is less effective for complex contour machining, limiting its application.

 

Roll-In Entry

Characteristics: Ensures consistent chip thickness

Applicable Scenarios: Grooving, contour machining

Operation Method: The milling cutter enters the workpiece in a rolling manner, gradually increasing the cutting depth.

Advantages:

Maintains consistent chip thickness, improving surface finish

Reduces tool wear and heat generation

Suitable for high-speed Bearbeitungcutter entry

 

Nachteile:

Feed Rate Limitation: The feed rate must be reduced by 50% during entry, affecting machining efficiency.

Complex Programming: Requires precise CNC programming, demanding higher technical skills from operators.

High Tool Cost: Requires high-quality rolling tools, increasing tool costs.

 

Unsuitable for Shallow Grooves: In shallow groove machining, the advantages of roll-in entry are less pronounced and may reduce efficiency.

 

Zusammenfassung

Each milling cutter entry method has its unique advantages and disadvantages. In practical machining, the appropriate entry method should be selected based on workpiece material, machining requirements, and tool characteristics. By effectively utilizing these methods, machining efficiency can be maximized, tool life extended, and workpiece quality ensured. Additionally, addressing the disadvantages of each method through measures such as optimized programming and adjusted cutting parameters can further enhance machining results

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

婷婷人妻少妇激情在线-欧美日韩人体艺术一区二区| 天天干天天日天天射天天舔-精品香蕉视频官网在线观看| 精品一区二区三区av在线-欧美黑人巨大精品一区二区| 国产欧美一区二区三区嗯嗯-欧美一区二区日本国产激情| 色噜噜噜噜一区二区三区-欧美最猛黑人做爰视频| 可以免费看污污视频的网站-日韩欧美不卡视频在线观看| 国产美女网站在线观看-国产精品亚洲综合网69| 亚洲国产视频不卡一区-激情欧美视频一区二区| hd在线观看一区二区-免费一区二区三区毛片在线| 三级a级一级大片在线观看-日韩av有码免费观看| 久久99国产综合精品女人-日韩一区二区三区在线不卡| 国产午夜精品理论片A级漫画-久久精品国产99亚洲精品| 国产精品v欧美精品v日韩精品-国产欧美日韩精品区一区二污污污| 国产av一区二区三区日韩接吻-av网址在线播放网站| 国产av一区二区三区日韩接吻-av网址在线播放网站| 亚洲福利视频免费观看-中文字幕日本不卡一区二区| 亚洲av综合av一区东京热-黄页免费视频网站在线观看| 欧美一级二级三级在线看-日韩精品欧美嫩草久久99| 一区二区三区女同性恋-熟妇高潮一区二区高清网络视频| 日本亚洲精品中字幕日产2020-很黄很黄的裸交视频网站| 久久人妻一区二区三区欧美-国内不卡的一区二区三区| 色噜噜噜噜一区二区三区-欧美最猛黑人做爰视频| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 熟女熟妇伦51788-国产av在线播放一区二区三区| 欧美aa一级视频播放-久一一区二区三区大香蕉| 免费av一区在线观看-国产精品视频高潮流白浆视频免费| 欧美精品午夜一二三区-a屁视频一区二区三区四区| 中文字幕偷拍亚洲九色-亚洲视频不卡一区二区天堂| 国产美女裸露无遮挡双奶网站-国产精品色午夜视频免费看| 亚洲区欧美区在线视频-亚洲碰碰人人AV熟女天堂| 中文不卡一区二区三区-老司机在线老司机在线一区| 欧美成人精品巨臀大屁股-亚洲综合欧美日韩一区| 99在线观看精品视频免费-国产极品一区二区三区四区| 国产精品久久久精品一区-99久久免费精品国产男女性高好| 俄罗斯胖老太太黄色特级片-国产精品黑丝美腿美臀| 欧美aa一级视频播放-久一一区二区三区大香蕉| 99久久精品一区二区成人-麻豆国产av玩弄放荡人妇系列| 午夜福利院免费在线观看-久久精品日产第一区二区三区画质| 国产精品一区二区在线免费-久久精品国产亚洲av热明星| 五月婷婷六月在线观看视频-亚洲黑寡妇黄色一级片| 久久高清超碰av热热久久-国产高清不卡免费视频|