欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Today we continue to share some information about tungsten carbide dies by going back to the basics. The following cemented carbide dies are widely used in various industries, from nuts and bolts to grooves and missiles. Tungsten carbide molds and tools have become an important part of modern manufacturing industry. Metal and other hard materials are made into various shapes, parts and products by using the strength of tungsten carbide!

cold forming CARBIDE DIES

In cold forming, or cold heading, a cold metal slug will be put into the die, and then formed into the desired shape with a heavy blow. The impact force causes the metal to flow into the desired shape in the cemented carbide die by exceeding the yield strength of the metal. Modern cold forming is usually used for rapid forming metal parts such as screws, bolts and many other fasteners.

drawing sketch for a cold forming carbide die

Cold heading materials can be copper, aluminum, carbon steel, alloy steel, stainless steel and titanium alloy, and the material utilization rate can reach 80 ~ 90%. Cold heading is mostly carried out on a special cold heading machine. The cold upsetting machine can complete the processes of material cutting, upsetting, accumulation, forming, chamfering, thread rolling, diameter reduction and edge cutting in sequence. The bar is automatically fed into a certain length by the feeding mechanism, and then cut into blank by the cutting mechanism. Finally, it is sent to the accumulation forming and punching station for cold upsetting by the clamp transmission mechanism.

Wolframcarbid Drawing Dies

Wire drawing (wire drawing die) dies are usually used to form wire, bar, bar and pipe. Common drawing materials include steel, aluminum and copper.

what is drawing?

Drawing is a metal processing process, which uses tension to stretch (elongate) metal, glass or plastic. When a metal is drawn (pulled), it stretches and thins to obtain the desired shape and thickness. Drawing is divided into two types: sheet metal drawing and wire, bar and pipe drawing. Sheet metal drawing is defined as plastic deformation on the bending axis. For wire, bar and pipe drawing, the starting material is drawn through the die to reduce its diameter and increase its length. Drawing is usually carried out at room temperature, so it is classified as cold working process; However, large wires, bars or hollow sections can also be drawn at high temperatures to reduce the force.

why is tungsten carbide suitable for drawing metal?

Tungsten carbide has high compressive strength and can withstand extreme pressure; This material is ideal for deep drawing dies. Most major manufacturers use cemented carbide dies in the drawing process. Drawing materials include low carbon steel, stainless steel, high carbon steel and other steel alloys. Softer materials, such as aluminum or brass, are also often drawn.

The wire drawing process includes drawing through a die to reduce the diameter of the steel wire to the required size while keeping the volume unchanged. Draw the wire through a series of drawing dies to determine the size of the wire. The inner diameter of each die is slightly smaller than that of the previous die, so as to gradually reduce the width of the wire. The last mold in the series forms the wire to its target size.

Pipe drawing dies are usually round, hexagonal or square, but can be made into any shape required by the manufacturer. The tube drawing process is similar to the wire drawing process; However, the mandrel is used to form the internal dimensions of the tube. The ma4 Arten von Hartmetallschneideisen, die Sie kennen sollten 2ndrel is located in the tube and in the die. When the tube is pulled through the die, the mandrel will be formed inside to determine the wall thickness and inner diameter. A properly formed mandrel will form a smooth surface inside the pipe.

Bars and rods are drawn in a similar way to wire, but they tend to be much thicker. A variety of metals are used in this application, including many steels and copper alloys. The cutter is used to determine the size of the rod and the rod according to the length.

4 Arten von Hartmetallmatrizen, die Sie kennen sollten 3

Carbide Extrusion Dies

Extrusion dies are usually used in a process in which slugs are pushed through the die to form the required cross-sectional area. If applied to pipes, use man drel in this process. Extrusion can be carried out in a variety of materials and at different temperatures to obtain the required properties of extruded products. Materials that can be formed with extrusion dies include steel, copper, aluminum, tin, lead, nickel, and even plastics. Products formed by extrusion include pipe, wire, bar, bar, pipe and electrode.

4 Types of Carbide Dies You should Know 4

Common carbide die gradesYG15

Klasse   Dichte (g / cm2)TSR (MPa)H?rte (HRA)Korngr??e (um)
YG3X15.1≥1700≥920.8
YG614.9≥2150≥902
YG6X14.9≥2300≥91,50.8
YG814.8≥2800≥89,82
YG1514≥3000≥87,52

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

99久久国产综合精品女| 玩弄邻居少妇呻吟11p| 国产乱子伦视频一区二区三区| 国精品午夜福利视频导航| 国产精品午夜小视频观看| 欧美巨屌虐无毛骚逼| 极品美女销魂一区二区三区| 五月天国产成人av在线| 日韩在线视频不卡一区二区三区| 另类 专区 综合 中文| 91秦先生全集在线观看| 少妇无套带白浆嗯呢啊污| 中文字幕一区二区三区中文字幕| 国产乱理伦片在线观看夜| 国产日本欧美激情| 亚洲国产成人手机版| 国产成人精品区在线观看| 娇嫩的被两根粗大的np| 亚洲国产日韩欧美高清片| 黑人大鸡巴双插美女| 国产精品毛片一区视频播| 大波美女被插的好爽| 亚洲中文字幕二区不卡| 亚洲乱码专区一区二区三区四区| 日韩欧美一区二区三区在线视频| 日本精品久久人妻一区二区三区| 成人黄色网破处在线播放| 最是人间烟火色在线播放| 国产精品视频美熟女一区二区| 国产精品视频一区二区三区分享| 九九在线视频热线视频精选| 市长含着秘书的奶头| 大鸡吧小骚逼视频| 中文字幕在线观一二三区| 公交车上被后入搞逼漫画| 一区二区国产精品免费视频| 久久综合娱乐中文网| 最新日本一区二区三区免费看| 麻豆国产欧美一区二区三区r| 欧美黄色三级成人小视频| 天天天天天干夜夜夜夜夜操|